experimental study of effective thermal conductivity of zno/eg nanofluid is presented in thisresearch. the nanofluid was prepared by dispersing zno nanoparticles in ethylene glycol using asonicator and adding surfactant. ethylene glycol based nanofluid containing zno nanoparticlewith a nominal diameter of 18 nm at different solid volume fractions (very low to high) atvarious temperatures was ex...

Abstract The transient plane source method was applied to measure the effective thermal conductivity in dimagnesium iron hexahydride (Mg 2 FeH 6 ) prepared a high-pressure synthesis of 50 temperature-driven de-/hydrogenation cycles. Temperature- and pressure-dependent measurements as-synthesized Mg powder have been performed. Measurements for as synthesized were carried out between 100 bar temp...

Cascaded thermal storage, consisting of multiple Phase Change Materials (PCMs) with different melting temperatures, has been proposed to solve the problem of poor heat transfer caused by unavoidable decrease of temperature differences during heat exchange process. This paper conducts a theoretical study of the overall thermal performance for a cascaded thermal storage system. Both heat transfer...

In the present paper, an experimental assessment was performed on the transient thermal performance of a heat sink filled by a phase change material (PCM) and PCM embedded with carbon nanofibers (CNFs) and titania (TiO2) nanoparticles as nanostructured materials. In order to enhance the thermal conductivity of PCM, CNFs and TiO2 nanoparticles at different loadings (0.5wt. % and 2 wt.% of CNFs a...

International programmes such as EUROFLUX focus on the analysis of long-term fluxes and energy budgets in the biosphere. Reliable estimates of hourly energy budgets require an accurate estimation of soil heat flux, that is often non-negligible even in a forest, and can be predominant during the night. Over long periods of time such as one to several months, its contribution can also be signific...

Longitudinal heat conduction is an important parameter in the cryogenic field, especially in cryogenic heat exchangers. In the present work, the parasitic effect of tube wall longitudinal heat conduction on temperature measurement has been studied in cryogenic laminar hydrogen flow. The effects of various parameters such as wall cold end temperature, wall thermal conductivity, gas volumetric fl...

the basis of the ohmic heating process is the transmission of alternating electric current through multi-phase solutions that is followed by heat generation due to particle resistance to the transmitted electric current. throughout the present study, simultaneous transfer of heat and electricity was modeled in a two-phase system of solid-liquid food to investigate the critical factors affecting...