B susceptibility and hardness of three yellow dent corn hybrids were determined for kernels separated into 6 size and shape categories and equilibrated to 12.3 and 14.7% moisture (wet basis). Measurements for breakage susceptibility by severe impact from the Wisconsin Breakage Tester (WBT) and by a grinding action from the Stein Breakage Tester (SBT) were determined by sieve and by a green dye ...

The hardness properties of materials are tracked from early history until the present time. Emphasis is placed on the hardness test being a useful probe for determining the local elastic, plastic and cracking properties of single crystal, polycrystalline, polyphase or amorphous materials. Beginning from connection made between individual hardness pressure measurements and the conventional stres...

s: Aim: The aim of this research work was to compare and evaluate the hardness and flexural strength of three different commercially available fixed provisional restorative resins. Objective: The objectives of this research work are, to assess whether setting mechanism of fixed provisional restorative resins has an effect on the physical and mechanical properties and to compare and contrast the...

The purpose of this study was to evaluate hardness (indicator for polymerization) and thickness of two types of resin cement at coronal, middle and apical level of tooth root canal. Ten extracted maxillary incisors were instrumented and post space was prepared for cementation of titanium post. Samples were divided into two groups and each group was cemented either of the two types of resin ceme...

The aim of the work was to evaluate the influence of the temperature of investment healting on the tensile strength and Vickers hardness of CP Ti and Ti-6Al-4V alloy casting. Were obtained for the tensile strength test dumbbell rods that were invested in the Rematitan Plus investment and casting in the Discovery machine cast. Thirty specimens were obtained, fifteen to the CP Titanium and fiftee...

This study evaluated the effect of microwave energy on the hardness, impact strength and flexural strength of the Clássico, Onda-Cryl and QC-20 acrylic resins. Aluminum die were embedded in metallic or plastic flasks with type III dental stone, in accordance with the traditional packing technique. A mixing powder/liquid ratio was used according to the manufacturer's instructions. After polymeri...

AIM To analyze the influence of various placement techniques on Vickers microhardness of Class II cavities restored using resin composite in different depths and layers. METHODS AND MATERIALS Sixty-four standardized Class II cavities (5.0 x 3.0 x 1.5 mm3) were prepared in sound human, maxillary premolars. The cavities were divided into four experimental groups (n=16) according to the composit...

statement of problem: there are controversial reports regarding physical and mechanical properties of resin composites and glass ionomer cements. some revealed higher strength and hardness for resin composites while others showed a comparable value for glass ionomer cements. evaluation of mechanical properties of different types of resin composites in comparison with resin modified glass ionome...

ADVANCED MATERIALS & PROCESSES • APRIL 2012 I n 1925 in the UK, Smith and Sandland developed an indentation test that used a squarebased pyramidal-shaped indenter made of diamond[1]. The test was developed because the Brinell test (introduced in 1900), which (until recently) used a round hardened steel ball indenter, could not test steels harder than ~450 HB (~48 HRC). They chose this shape wit...

INTRODUCTION For the construction of any dental prosthesis, accurate impressions are necessary. Hence, we undertook the present study to evaluate and compare the surface hardness of gypsum casts poured from impressions made using conventional alginate and self-disinfecting alginate. MATERIALS AND METHODS A total of 30 impressions of stainless steel die were made, out of which 15 impressions w...