The feasibility and sensitivity of electrochemical noise (EN), electrochemical impedance spectroscopy (EIS), and linear polarization resistance (LPR) for detection of corrosion in post-tensioning (PT) components was investigated. The use of the electrical resistance (ER) technique, as well EIS and LPR, to detect air space corrosion at the grout voids was also explored. The results showed that h...

The corrosion behaviors of Mg-2Zn-0.2Mn-xCa (denoted as MZM-xCa alloys) in homogenization state have been investigated by immersion test and electrochemical techniques in a simulated physiological condition. The microstructure features were characterized using scanning electron microscopy (SEM), X-ray diffraction (XRD), transmission electron microscopy (TEM) and electron probe microanalysis (EP...

 provision of large, stress-bearing area  excellent fatigue strength  good shock absorption  reduced galvanic corrosion  no need to have access to far-side of adherend to make joint  bonding is possible on dissimilar materials  provision of smooth contours and sections around joint areas  sealing  improved damping which increases structural stiffness  reduction in distortion and metal...

OBJECTIVE To analyze the effect of various coating formulations on the mechanical and corrosion properties of nickel-titanium (NiTi) orthodontic wires. MATERIALS AND METHODS Uncoated, rhodium-coated, and nitrified NiTi wires were observed with a three-point-bend test, surface roughness (Ra) measurement, scanning electron microscopy, energy dispersive spectroscopy, and electrochemical testing ...

Background and aims. This study compared the galvanic corrosion of orthodontic wires and brackets from various manufacturers following exposure to a fluoride mouthwash. Materials and methods. This study was conducted on 24 lower central incisor 0.022" Roth brackets of four different commercially available brands (Dentaurum, American Orthodontics, ORJ, Shinye). These brackets along with stainles...

The aim of this study is to perform a spatial complex hydrochemical analysis groundwater quality in Bulgaria and compile map. For purpose, data for the chemical composition (Ca2+, Mg2+, Na+, Cl–, SO42–, NO3–, HCO3–, TDS, EC) fresh (having shallow circulation) year 2015 have been summarized. These are waters most vulnerable incoming contaminants infiltrating from surface and, at same time, these...

The successful development of scanning probe techniques to characterize corrosion in situ using multifunctional probes is intrinsically tied to surface topography signal decoupling from the measured electrochemical fluxes. One viable strategy is the shear force controlled scanning microcapillary method. Using this method, pulled quartz micropipettes with an aperture of 500 nm diameter were used...