In this study, 5052 Al–Mg alloy was pre-treated and friction stir processing (FSP) was then performed on the specimens to explore the deformation resistance. The experimental results indicate that the FSP specimens not only had better tensile properties but also better vibration fracture resistance. It is significant that the tensile elongation and deformation resistance tended to increase as t...

It is well known that the residual stress of the friction-stir-welded joint affects the fatigue strength and life, and the corrosion performance. In this paper, a three-dimensional finite element model is established to study the thermal history and stress evolution in the butt welding of aluminium alloy 6061-T6, which will comprehensively provide insight into the friction-stir-welding process....

The initial microstructure plays an important role in determining the spatial and temporal evolution of the microstructure during friction stir welding (FSW). The overall kinetics of microstructural evolution is location sensitive and the effect of the process strain, strain rate and thermal cycle creates complexities. In the present study, magnesium based WE43 alloy has been welded employing t...

the objective of this study was to develop a numerical model for the prediction of temperature distribution, effective plastic strain distribution, and especially material flow in friction stir welding of copper plates. the deform-3d software was used by incorporating a lagrangian incremental formulation. threedimensional results of the material flow pattern which were extracted using the point...

In this paper, new numerical modeling of material flow in the thermo-mechanical friction stir welding process is presented. In this numerical model, the discretization in space is derived by the meshfree Galerkin method using a Lagrangian meshfree convex approximation. The discrete thermal and mechanical equations are weakly coupled as the time advances using a forward difference scheme. A mort...

In this research, a method for implementing automatic seam-tracking for friction stir welding, referred to hear as WeaveTrack, is presented. In this extrumum-seeking control technique, the tool weaves back and forth during welding to maintain the location where axial force is greatest, which is shown to be the center of the weld. Results demonstrate the effectiveness of this technique in tracki...

Friction stir welding is advance joining process for different similar and dissimilar metals. It is commonly used for joining of Aluminium alloys. In this study an attempt were made to join commercial structuralaluminium with 7039 aluminium alloy. A zig-zag pattern of hardness was found in weld nugget. Microstructural characterization and fractography of joints were examined using optical and s...