numerous empirical correlations exist for the estimation of crude oil viscosities. most of these correlations are not based on the experimental and field data from iranian geological zone. in this study several well-known empirical correlations including beal, beggs, glasso, labedi, schmidt, alikhan and naseri were optimized and refitted with the iranian oil field data. the results showed that ...

To ensure bearing reliability, it is traditional for compressor manufacturers to specify a minimum oil sump temperature difference above the saturated discharge temperature in a high-side compressor and suction temperature in a low-side compressor. This minimum oil sump temperature specification is, in essence, a surrogate measure of the minimum viscosity the compressor manufacturer reqtrires t...

A high pressure drop happens when heavy oil with high viscosity moves through the oil pipeline. A variety of methods to avoid this pressure drop is available. One of which is injection of chemicals to reduce the viscosity and ultimately reduce pressure drop. Using the pipesim software, the effect of dispersion of nano and micro-particles into the oil has been simulated to study the amount of th...

A thermochemical conversion (TCC) process was developed and researched to reduce waste and to produce renewable energy from swine manure. Experimental results showed that operating temperature and retention time were the key parameters. It is critical that a process gas, reducing or non-reducing gases but not water vapor, be added to the process in order to yield an oil product. The operating t...

Electrorheological properties of suspensions are considerably affected by hydrophilicity of suspension particles. As a model material, polyaniline base powder protonated with sulfamic, tartaric, or perfluorooctanesulfonic acids provided particles of various hydrophilicity. The experiments revealed that, in the absence of electric field, due to a good compatibility of hydrophobic polyaniline par...

research in nanotechnology in the petroleum industry is advancing rapidly and an enormous progress in the application of nanotechnology in this area is to be expected. in particular, adding nanoparticles to fluids may drastically benefit enhanced oil recovery and improve well drilling, by changing the properties of the fluid, rocks wettability alteration, advanced drag reduction, strengthening ...

This research investigated the effect of three different acids (sulphuric acid, hydrochloric acid and nitric acid), on three different clay deposit samples, to recycle used lubricating oil. To achieve this objective, filtration of the used oil was carried out first to remove impurities like: sand, metal chip and other micro impurities using: Buncher funnel, filter papers and vacuum pump. The fi...

Industrial oil spills into aquatic environments can have catastrophic environmental effects. First responders to oil spills along the coast of the Gulf of Mexico in the southern United States have used spunbond nylon fabric bags and fences to separate spilled oil and oil waste from contaminated water. Low area mass density spunbond nylon is capable of sorbing more than 16 times its mass in low ...