An attempt has been made to beneficiate the Indian coking coal fines by a combination of Spiral, flotation and Oleo Flotation processes. Beneficiation studies were also carried out on 0.5mm coal fines using flotation and oleo flotation by splitting at size 0.063mm.Size fraction of 0.5mm-0.063mm and -0.063mm size were treated in flotation and Oleo flotation respectively. The washability studies ...

The development of froth flotation is traced from its earliest-known use through the discoveries leading to the present knowledge of the science. The factors influencing the flotation of non-sulfide and non-metallic minerals are discussed, and the machines used in commercial flotation operations are described. Experimental work on the flotation beneficiation of phosphate rock is presented as an...

The present work investigates the conjugation of flotation and photo-Fenton techniques on oil removal performance from oilfield produced water. The experiments were conducted in a column flotation and annular lamp reactor for induced air flotation and photodegradation steps, respectively. A nonionic surfactant was used as a flotation agent. The flotation experimental data were analyzed in terms...

separation method that is widely used in coal beneficiation for the separation of fine coal particles from associated minerals in water slurries. Since the cumulative recovery of a component in the concentrate is proportional to flotation time, the flotation process can be considered as a time-rate recovery process (Emad, Mohammad, and Bahram, 2010). Therefore, the general mathematical flotatio...

Abstract Deinked pulp flotation column has been applied in wastepaper recycling. Bubble size in deinked pulp flotation column is very important during the flotation process. In this paper, bubble images of deinked pulp flotation column were first caught by digital camera, and then the bubbles were detected by using a detection algorithm based on sparse and redundant image processing. The result...

It is possible to obtain good performance from a flotation plant but it has proved difficult to maintain such performance. Recovery rates on a flotation plant can be around 90% and often lower, making flotation one of the least efficient processes in the concentration path. Hence, over the last few decades much research and development has gone into the stabilization and optimization of flotati...

In this paper, we build an air conveyor with newly developed vortex bearing elements, and study the flotation precision of the front-end of the substrate in quasi-static flotation transport. We experimentally discuss the three influential factors: air supply pressure, thickness of the substrates and installing direction of the vortex bearing element. We find that during the process of transport...

AIMS To evaluate a safe sputum processing method for detection of tuberculosis in developing countries. METHODS A sample processing method was developed in which acid fast bacilli were killed with 1% sodium hypochlorite and concentrated by flotation on a layer of xylene before staining by the Ziehl Neelsen or auramine O methods. RESULTS Best results were obtained by auramine O staining afte...

Flotation deinking of old newsprint (ONP) using polydiallyldimethylammonium chloride (polyDADMAC) as the only deinking agent was studied. The results demonstrate that polyDADMAC can neutralize dissolved anionics to form small particles. These small particles, together with ink, filler, and fines, strongly adsorbed onto air bubble surfaces and functioned as particle foaming agents. Therefore, no...

Prediction of metallurgical responses during the flotation process is extremely vital to increase efficiency using a proper modeling approach. In this study, two new variants recurrent neural network (RNN) method were used predict copper ore indices, i.e., grade and recovery within different operating conditions. The model input parameters including pulp pH solid content as well frother collect...