The most prominent feature of sheet material forming process is an elastic recovery phenomenon during unloading which leads to springback and side wall curl. Therefore evaluation of springback and side wall curl is mandatory for production of precise products. In this paper, the effects of some parameters such as friction coefficient, sheet thickness, yield strength of sheet and blank-holder fo...

In this paper, numerical simulation of FRP composite cylinder tubes progressive crushing processes is conducted using LS-Dyna. Details on the numerical modeling strategy are given and discussed. It is found that triggers introduced in the numerical simulation can effectively model the bevel trigger at the end of the tubular specimens. It is also found that two-layer finite element model based o...

in this article, finite element method and ale formulation were used to numerically simulate impact of low-velocity specific projectiles with water surface. for the simulation, ls-dyna finite element code was used. material models which were used to express behavior of air and water included null material model. for the projectile, plastic-kinematics material model was applied. mie-gruneisen eq...

Computational methods can play a significant role in characterization of the carbon-based nanocomposites by providing simulation results. In this paper, we prepared a brief review of the mechanical properties of carbon nanotubes (CNTs), Graphene, and coiled carbon nanotube (CCNTs) reinforced nanocomposites. Varies simulation studies in mechanical properties of nanocomposites including represent...

Ultrasonic transducers play a significant role in generating and receiving the acoustic waves in ultrasonic flowmeters. Depending on the required accuracy, the ultrasonic transducers can be installed either in one pair or more in an ultrasonic flowmeter. The main part of an ultrasonic transducer is its piezoceramic element. In this work, four piezoceramic elements with different diameter to thi...

a two-dimensional single particle finite element model was used to examine the effects of particle fragmental pattern on the average molecular weights, polymerization rate and particle overheating in heterogeneous ziegler-natta olefin polymerization. a two-site catalyst kinetic mechanism was employed together with a dynamic two-dimensional molecular species in diffusion-reaction equation. the i...

This report describes the implementation of a coupled mechanical/heat ransfer simulation using a Finite Element Interface (FEI). The FE1 is an abstraction layer, which lies between the application code and its linear solver libraries, controlling the set-up and solution of the linear system arising in the finite element simulation. The performance and scalability of the ISIS++ FE1 is examined o...

the built up layer thickness in secondary deformation zone is one of the important parameters in metal cutting process. the built up layer (bul) is formed in second deformation zone near the tool-chip interface in the back of the chip. this parameter influences the tool life and machined surface quality. this bul should not be confused with the built up edge (bue). the deformation of the bul in...

abstract: in this paper, the results of experimental and numerical simulation of low velocity impact process have been carried out to investigate energy absorption of composite sandwich panels with 3d woven fabrics of glass fibers and epoxy resin. for this purpose, diagrams of force-displacement of the quasi-static and quasi-dynamic impact tests were studied. for the finite element simulation, ...