The paper presents electromagnetic finite element analyses for the eddy current losses in permanent magnets of synchronous machines. The main focus lies on high order element formulations and the comparison of the respective results against an analytical evaluation of these losses for both linear and rotational arrangements. Therefore, the representation of skin depth and wave length with the n...

a non-linear finite element model could be a useful tool in the development of a method of predicting soil pressure-sinkage behaviour, and can be used to investigate and analyze soil compaction. this study was undertaken to emphasize that the finite element method (fem) is a proper technique to model soil pressure-sinkage behaviour. for this purpose, the finite element method was used to model ...

The finite element method (FEM) can be applied to practically analyze the tall buildings in which the shear walls are used to resist the lateral loads. Accordingly, a variety of displacement and strain-based as well as frame macro elements have been proposed for analysis of the tall buildings. With respect to application of the lower order plane stress elements, analytical problems may arise wi...

Equal-channel angular pressing (ECAP) combined with the Conform process provides a solution for the continuous production of ultrafine-grained materials. In the present study finite element method was executed to investigate the effects of die channel angle and friction on the strain homogeneity and the required torque in ECAP-Conform process. Deformation behaviour of Al 6061 wires was analyzed...

In this paper a systematic approach of repairing polygonal meshes is developed for volume meshing, which can then be used in finite element analyses. All poor-quality elements are classified into three general categories: point element, line element, and overlapped element. A robust iterative scheme is proposed to remove all poor-quality elements progressively, leading to a successful volume me...

in this paper, single, bi-layered and three-layered tube hydroforming processes were numerically simulated using the finite element method. it was found that the final bulges heights resulted from the models were in good agreement with the experimental results. three types of modeling were kept with the same geometry, tube material and process parameters to be compared between the obtained hydr...