We describe novel fiber Raman lasers pumped directly by spectrally combined high power multimode laser diodes at ∼975 nm and emitting at ∼1019 nm. With a commercial multimode graded-index fiber, we reached 20 W of laser output power with a record slope efficiency of 80%. With an in-house double-clad fiber, the beam quality improved to M = 1.9, albeit with lower output power and slope efficiency...

We present first all-fiber unidirectional ring thulium-doped laser, based on isolator-free theta cavity configuration and fiber Bragg mirror as filtering element. Laser provides 1W output power with 30% slope efficiency, and linewidth of about 0.2nm. OCIS codes: (060.3510) Lasers, fiber; (060.2390) Fiber optics, infrared; (160.5690) Rare-earth-doped materials

Over the past years, the internet core rapidly increases, transparent protocols become more available for DWDM system in the fiber to the home, fiber to the institutions service. In densely spaced wavelength-routed and large-capacity optical network systems, single-mode lasers with narrow linewidth and low temperature sensitivity are of particular importance as the light sources in transmitter ...

Also the optical fiber amplifiers FAs that amplify weak signals such as the. Rare-Earth-Doped Fiber Lasers and Amplifiers, Michael J.F.Chapter 2. Optical and Electronic Properties of Rare Earth Ions in Glasses William J Miniscalco Abstract-HiRes PDF 2316 KB-PDF wlinks 2330 KB.amplifier materials in the system of rare-earth doped glasses are presented. rare-earth-doped ram concept manual pdf fib...

In this paper, we demonstrate that the sensitivity of Faraday effect based heterodyning fiber laser sensors for magnetic field can be effectively enhanced by lowering the intrinsic linear birefringence inside the fiber laser cavity. Well explained by theoretical analysis and confirmed by birefringence tuning through transversal force, it shows that the sensitivity to magnetic field intensity is...

INTRODUCTION The Thulium fiber laser has recently been tested as a potential alternative to the Holmium:YAG laser for lithotripsy. This study explores use of a short taper for expanding the Thulium fiber laser beam at the distal tip of a small-core fiber. METHODS Thulium fiber laser radiation with a wavelength of 1,908 nm, 10 Hz pulse rate, 70 mJ pulse energy, and 1-millisecond pulse duration...

We demonstrate the feasibility of a new concept of laser that benefits from both fiber and laser crystals: a cw diode-pumped solid-state laser with an intracavity fiber Bragg grating as the output coupler. The design of the laser cavity and the experimental demonstration are both described. Several applications are mentioned.

An all-fiber curvature laser sensor by using a novel modal interference in-fiber structure is proposed and experimentally demonstrated. The in-fiber device, fabricated by fusion splicing of multimode fiber and double-clad fiber segments, is used as wavelength filter as well as the sensing element. By including a multimode fiber in an ordinary modal interference structure based on a double-clad ...

A new method for sample fiber Bragg grating fabrication by use of both femtosecond laser and CO(2) laser has been proposed and demonstrated. Such a method exhibits the advantages of high fabrication flexibility, and good thermal stability. The sampling period and duty cycle can be easily varied by changing the CO(2) laser beam scanning pattern during operation. The gratings produced have potent...

A high-power 83 W cladding-pumped Tm3+-Ho3+-doped silica fiber laser is reported. Using bidirectional 793 nm diode pumping, a maximum slope efficiency of 42% was produced after a threshold launched pump power of 12 W was exceeded. The laser operated at wavelengths near 2105 nm with moderate beam quality, i.e., M2 approximately 1.5. Further power scaling of the fiber laser was limited by thermal...