Multiple-evaporator/vapor compression cooling systems are used for air conditioning in multi-zone buildings with a refrigerant supplied to each individual zone-evaporator from a central compressor/condenser unit. Such systems, incorporating controlled electronic expansion valves associated to each evaporator and a variable-speed compressor, allow the overall system to be able to operate in diff...

The main purpose of this research is to analyze the performance of an evaporator for the organic Rankine cycle (ORC) system and discuss the influence of the evaporator on the operating characteristics of diesel engine. A simulation model of fin-and-tube evaporator of the ORC system is established by using Fluent software. Then, the flow and heat transfer characteristics of the exhaust at the ev...

The paper analyzes the various factors that cause failure of refrigerator evaporator. The refrigerator evaporator failure spectrum is constructed through qualitative analysis of the fault tree system after building a corresponding fault tree system. There is an analysis procedure of fault tree system based on computer aided fault tree analysis system (CAFTA).

Forced convection on heat exchangers yields to higher heat exchange coefficient and so permits to limit the temperature difference between air and the evaporator. Higher energy performances of the refrigerating cycle is affordable compared to natural convection evaporators. In Europe, many refrigerators and freezers integrate natural convection heat exchangers. Making a review of the actual ene...

A scheme is proposed to desalinate sea water using solar energy for the Thar Desert of India. The scheme has been using solar energy for the Thar Desert of India. The scheme has been designed to produce about 5.25 x 10 m/yr (13860 MG/yr) of fresh water with 11.52 km (4.5 miles) of collector area. The solar collectors are rectangular concrete tubes, half buried in the ground, through which sea w...

Microchannel heat exchangers (MCHX) are being increasingly applied in heat pumps because of their compactness, significant charge reduction, lower refrigerant pressure drop and lower air-side fan power consumption compared to traditional round tube-plate fin (RTPF) heat exchangers. Using a microchannel condenser as well as evaporator in a heat pump system also offers significant potential for c...

Liquid recirculation is a method of improving evaporator performance by supplying the evaporator with more liquid than is evaporated. The excess liquid, which is generally provided by means of an externally-driven, mechanical pump, eliminates dryout and increases overall heat transfer coefficient in the evaporator. Liquid recirculation is common in large-scale industrial refrigeration systems, ...

Propositions of vapor compression cycles for microgravity applications have a long history. In contrast, experimental efforts and implemented are rare in general recent years even less than the 1980s 1990s. The paper shows results from cycle on parabolic flights. focus lies effects varying gravity forces condenser evaporator. Flow visualizations clearly showed change to an annular or slug-annul...

the pressure drop of refrigerant r-134a flow boiling inside a horizontal tube has been investigated experimentally. the test set-up which was used in this investigation is a well instrumented vapor compression refrigeration system. these instruments are thermocouples, flow meter, pressure gauges and the pressure drop measuring apparatus. this system consisted of three electrically heated evapor...