Abstract A sharp cube textured Ni overlayer on Cu substrates has been developed for the manufacturing of long-length RABiTS-based coated conductor tapes. Using a low-cost, non-vacuum and easily scalable technique of electroplating, smooth, crack-free and continuous Ni overlayers were deposited on cube textured Cu substrates without any intermediate layers. In addition, sharp cube textured Sm-do...

Modern automated production lines usually use one or multiple computer-controlled robots or hoists for material handling between workstations. A typical application of such lines is an automated electroplating line for processing printed circuit boards PCBs . In these systems, cyclic production policy is widely used due to large lot size and simplicity of implementation. This paper addresses cy...

We strove to produce a microdiamond（MD）- copper composite by electroplating. Unfortunately, is naturally non-wetting with MD because of their chemical incompatibility. achieved modification the amino group for surface using photocatalytic treatment, followed electroplating copper. Results demonstrated that - material assisted photocatalysis markedly improved interfacial affinity and thermal con...

the poly(ethyleneimine)-functionalized silica has been developed successfully as an effective adsorbent for the adsorption removal of cu(ii) ions from electroplating wastewater. the influences of ph, contact time and initial concentration of cu(ii) ions on the adsorption capacity and the effect of adsorbent dosage on the removal efficiency of cu(ii) ions from electroplating wastewater were inve...

he wide use of nickel coatings is T due to their valuable properties.l-2 Nickel coatings are used primarily for decorative and industrial purposes. The uses of nickel in the decorative field are. numerous including automobile parts, fumiture, general hardware and fasteners, bicycles, as undercoats in low-cost jewelry, sporting equipment, toys, cutlery, lamps and plumbing fixtures. Most of the d...

The poly(ethyleneimine)-functionalized silica has been developed successfully as an effective adsorbent for the adsorption removal of Cu(II) ions from electroplating wastewater. The influences of pH, contact time and initial concentration of Cu(II) ions on the adsorption capacity and the effect of adsorbent dosage on the removal efficiency of Cu(II) ions from electroplatin...

We demonstrated a practical process of fabricating nickel molds for nanoimprinting. Dual-side polished glass is chosen as the substrate on which nickel nanostructures are successfully electroplated. Photonic crystal structures with 242 nm diameters and other nanoscale pillars down to 9 nm diameters are achieved over a large area. The electroplating parameters are investigated and optimized. Thi...