INSTRUCTIONS The diameter of silicon wafer becomes larger in order to increase the number of chips per one wafer. For such a larger diameter silicon ingot is mainly sliced by using multi-wire method, in which a long thin wire is used with slurry. In this method, several hundreds of wafers could be sliced at the same time. However there are still problems remained, such as large cracks, slurry t...

Whereas in electrical discharge machining (EDM) the heat flux entering the workpiece is extremely high, the Fourier heat conduction model may fails. This article reports on determination of temperature distribution in the workpiece due to EDM using non-Fourier heat conduction model. Equations are solved by deriving the numerical solution. The temperature layers and profiles of sample calculatio...

microhole electrical discharge machining (EDM) system with daptive fuzzy logic control and precision piezoelectric stage is eveloped in this study. A high-speed EDM monitoring system is mplemented to measure the gap voltage, current, and ignition elay time, which are used to derive three input parameters—the verage gap voltage, deviation in spark ratio, and change in the eviation in spark ratio...

This study focuses on fabrication of a micro plastic part using custom made vertical injection molding machine. Electrical discharge machining (EDM) and micro mechanical machining was used to fabricate micro shape cavity on aluminum mold. The mold was embedded with Polymethyl Methacrylate (PMMA) window to observe the behavior of plastic melt flow during injection. The custom made vertical injec...

Background: Electrical Discharge Machining (EDM) is a well-established non-conventional machining process for the machining of electrically conductive and difficult-to-machine materials. But its applications are limited because of the slow machining rate and poor surface finish. Powder mixed EDM (PMEDM) is unitary of the recent progresses in the EDM process in which powder particles mixed in th...

Present work aims at multi-mechanical surface treatment of Ti-6Al-4V based-miniplate implant manufactured by electrical discharge machining (EDM) for biomedical use. Mechanical surface treatment consists of consequent use of ultrasonic cleaning, rotary tumbler polishing, and brushing. Surface layers are analyzed employing scanning electron microscopy and energy dispersive X-ray spectroscopy. Al...

Aim: In vitro study evaluation of the cyclic fatigue resistance of reciprocating and rotary single-file system [Wave One Gold (WOG), Reciproc, Hyflex electrical discharge machining (EDM) file systems] utilizing cyclic fatigue testing device. Materials and methods: Three nickel–titanium rotary systems (Hyflex EDM size #25, 0.06 taper and Reciproc and WOG size #25, 0.06 taper) were used in this s...