We present the procedure for designing a high speed and low power all-optical analog to digital converter (AO-ADC), by integrating InGaAsP semiconductor optical amplifier (SOA) with InP based photonic crystal (PhC) drop filters. The self-phase modulation in the SOA can shift the frequency of the Gaussian input pulse. The two output PhC based drop filters are designed to appropriately code the f...

Ultrahigh-speed tuning of an extended-cavity semiconductor laser is demonstrated. The laser resonator comprises a unidirectional fiber-optic ring, a semiconductor optical amplifier as the gain medium, and a novel scanning filter based on a polygonal scanner. Variable tuning rates up to 1150 nm/ms (15.7-kHz repetition frequency) are demonstrated over a 70-nm wavelength span centered at 1.32 micr...

Amnon Yariv California Institute of Technology Department of Applied Physics and California Institute of Technology Department of Electrical Engineering 1200 East California Boulevard 128-95 Pasadena, California 91125 Abstract. The bandwidth and residual phase noise of optical phaselocked loops (OPLLs) using semiconductor lasers are typically constrained by the nonuniform frequency modulation r...

Optical data extinction using ultra-long SOA is evaluated up to 56 Gb/s. The analysis of the deleterious effects such as spectral broadening and imperfect erasing predicts useful carrier wavelength reuse up to 20 Gb/s. Keywords—Optical Carrier reuse, Optical Data Processing, Semiconductor Optical Amplifier.

We model the non-linear gain characteristics of a Fabry-Perot semiconductor optical amplifier using a modified photon density rate equation. Good agreement is found with experimental results, with the simulation accurately reproducing all the major characteristics of the amplifier. To our knowledge, this is the first calculation using only the rate equations that accurately predicts the gain an...

We report experimental observations of optical bistability in a vertical-cavity semiconductor optical amplifier subject to an external pulsed input. Results show that the nonlinear transition exists with 1ns-duration pulsed input. © 2003 Optical Society of America OCIS codes: (190.1450) Bistability; (200.4660) Optical logic

We experimentally demonstrate an all-optical binary counter composed of four semiconductor optical amplifier based all-optical switching gates. The time-of-flight optical circuit operates with bit-differential delays between the exclusive-OR gate used for modulo-2 binary addition and the AND gate used for binary carry detection. A movie of the counter operating in real time is presented.

in this paper first we try to analysis the behavior ofthe soas in the optical networks and then have proposed anumerical simple model to simulate the behavior of thesemiconductor optical amplifiers. after that by employing thismodel as inline amplifier for a dwdm optical system, we havesimulated the transmission of 10 channels with bit rate 10 gb/sup to distance 3970 km with rz-dpsk modulation ...

We have demonstrated, the first time to our knowledge, a low-input intensity high-contrast (10:1) optical AND gate based on the differential gain (optical bistability) observed in an 850 nm GaAs vertical-cavity semiconductor optical amplifier (VCSOA). The input switching power is about 6 lW, which equals to the intensity of 16 nW=lm. It is about 2 orders of magnitude lower than in in-plane semi...

We report an experimental study of nonlinear effects, characteristic of mutual optical coupling, in an ultra-short coupling regime observed in a distributed Bragg reflector laser pair fabricated on the same chip. Optical feedback is amplified via a double pass through a common on-chip optical amplifier, which introduces further nonlinear phenomena. Optical coupling has been introduced via back ...