Using of nanofluids and ducts with corrugated walls are both supposed to enhance heat transfer, by increasing the heat transfer fluid conductivity and the heat transfer area respectively. Use of a diverging duct with a jet at inlet section may further increase heat transfer by creating recirculation zones inside the duct. In this work two-dimensional incompressible laminar flow of a nanofluid e...

cooling towers are widely used in most industrial units to reject waste heat to the atmosphere. this paper deals with an experimental analysis of heat and mass transfer phenomena between water and air by direct contact in a cooling tower. the tower is filled with 6 type packing. in this study temperature and pressure drop and tower characteristics was used in determining experimentally the ther...

An exhaustive experimental investigation has been carried out for accurate determination of interstitial heat transfer coefficients of ceramic foams in forced convective flows. The single-blow method was used, in which, the fluid temperature varies with time and convective heat transfer becomes time-dependent. The method results in a transient and conjugate heat transfer phenomena between the f...

Turbulent heat transfer in Helically Corrugated Tubes (HCT) was numerically investigated for pure water and SiO2 nanofluid using Computational Fluid Dynamics (CFD). This study was carried out for different corrugating pitches (5, 7, 8 mm) and heights (0.5, 0.75, 1.25 mm) at various Reynolds numbers ranging from 5000 to 13300. The effect of nanoparticles on heat transfer augmentation for plain t...

Laminar convection of a fluid with a temperature-dependent viscosity in an enclosure filled with a porous medium is studied numerically based on a Lattice Boltzmann method. It is shown that the variation in viscosity has significant influences on both flow and heat transfer behaviours. In comparison with the results for constant viscosity, the fluid with variable viscosity exhibits a higher hea...

Wildland firefighters work in unfavourable environments involving both heat and moisture. Moisture in clothing systems worn by wildland firefighters may increase or decrease heat transfer, depending on its source and location in the clothing system, location on the body, timing of application and degree of sorption. In this experiment, 4 outerwear/underwear combinations were exposed to 1 of 5 d...

Abstract: During solidification and casting in metallic molds, the heat flow is controlled by the thermal resistance at the casting-mold interface. Thus heat transfer coefficient at the metal- mold interface has a predominant effect on the rate of heat transfer. In some processes such as low pressure and die-casting, the effect of pressure on molten metal will affect the rate of heat transfer a...

The most important reason for the design of curved tubes is increasing the heat transfer between the fluid and the wall which has provided many applications in various industries such as air conditioning, micro-electric, heat exchangers and etc. The aim of this study is numerical investigation of nano fluids flow in spiral tubes with injection of base fluid in different Reynolds numbers. Accord...

In order to examine the laminar convective heat transfer of nanofluid, experiments carried out using silver-oil nanofluid in a concentric annulus with outer constant heat flux as boundary condition. Silver-oil nanofluid prepared by Electrical Explosion of Wire technique and observed no nanoparticles agglomeration during nanofluid preparation process and carried out experiments. The average size...