This review investigates erosion and abrasion in dental structures undergoing at- home bleaching. Dental erosion is a multifactorial condition that may be idiopathic or caused by a known acid source. Some bleaching agents have a pH lower than the critical level, which can cause changes in the enamel mineral content. Investigations have shown that at-home tooth bleaching with low concentrations ...

Ionizing radiation remains the most significant environmental factor, causing severe impacts on human health on the vast territory of Ukraine for 25 years. Medical monitoring of the dental health of more than 1500 people who participated in cleaning work at the Chernobyl power station territory after the catastrophe has demonstrated an increasing of specific dental problems occurred after sever...

the aim of this study was to assess the surface of yttrium-stabilized tetragonal zirconia (y-tzp) after surface treatment with lasers and airborne-particle abrasion.first, 77 samples of presintered zirconia blocks measuring 10 × 10 × 2 mm were made, sintered and polished. then, they were randomly divided into 11 groups (n=7) and received surface treatments namely, er:yag laser irradiation with ...

Resin composites were first introduced as anterior restorative materials, but are more and more used in posterior teeth, as amalgam replacements. Nowadays the so-called ‘condensable’ composites are frequently used in posterior teeth. These materials are subjected to high values of contact and mastigatory loads, loading rates and sliding distances. In such contact conditions, wear is the major f...

PURPOSE This study investigated the effect of laser parameters and air-abrasion on the peel strength of silicon-based soft denture liner to different denture resins. MATERIALS AND METHODS Specimens (N=180) were prepared out of three different denture base resins (Rodex, cross-linked denture base acrylic resin; Paladent, heat-cured acrylic resin; Deflex, Polyamide resin) (75 mm × 25 mm × 3 mm)...

Fabricating all-ceramic restorations with minimal or no application of a secondary phase while maintaining esthetics has been a sought-after goal of the dental profession. The objective has been development of a monolithic material with optical properties similar to the natural tooth without the need for layering porcelain. This article examines some of the newer cubic zirconia materials used i...

Fabricating all-ceramic restorations with minimal or no application of a secondary phase while maintaining esthetics has been a sought-after goal of the dental profession. The objective has been development of a monolithic material with optical properties similar to the natural tooth without the need for layering porcelain. This article examines some of the newer cubic zirconia materials used i...

INTRODUCTION The aim of this study was to assess shear bond strength of composite to dentin after air abrasion and laser treatment. METHODS 40 human extracted molars divided into 4 groups (n=10) received the following treatments. Group 1: carbide bur, Group 2: air abrasion with aluminum oxide 50 μm, Group 3: irradiated with Erbium-Doped Yttrium Aluminum Garnet (Er: YAG) laser (150 mJ/20Hz), G...

Purpose: The purpose of the present study was to investigate the bond strength of an indirect composite material to a magnetic stainless steel alloy. Materials and Methods: The surfaces of machined magnetic stainless steel alloy specimens were abraded with 600-grit silicon carbide paper and then grouped according to the type of surface treatment given: 1) without preparation, 2) tribochemical s...