نتایج جستجو برای: densification

تعداد نتایج: 2819  

2015
Yi Zhang Paul Grassia Alastair Martin Shane P. Usher Peter J. Scales

A model is presented for design of a thickener for solid-liquid separation where the flocs or aggregates within the solid-liquid suspension undergo an aggregate densification process due to the action of rakes. This aggregate densification facilitates suspension dewatering. The novel feature of the model is that it manages to couple together a hindered settling zone (higher up in the thickener,...

Journal: :Ecology 2016
Yafeng Wang Neil Pederson Aaron M Ellison Hannah L Buckley Bradley S Case Eryuan Liang J Julio Camarero

The most widespread response to global warming among alpine treeline ecotones is not an upward shift, but an increase in tree density. However, the impact of increasing density on interactions among trees at treeline is not well understood. Here, we test if treeline densification induced by climatic warming leads to increasing intraspecific competition. We mapped and measured the size and age o...

2013
M Grujicic K D Bishnoi

Molecular-level modelling and simulations of the high-pressure volumetric response and irreversible densification of a prototypical soda-lime glass are first employed. The molecularsimulation results obtained were next used to modify the pressure versus degree-of-compression (the negative of volumetric strain) and yield strength versus pressure relations in order to account for the effects of i...

2012
J. J. Purewal D. Liu J. Yang A. Sudik S. Maurer U. Müller

The metal-organic framework MOF-5 has attracted significant attention due to its ability to store large quantities of H2 by mass, up to 10 wt.% absolute at 70 bar and 77 K. On the other hand, sinceMOF-5 is typically obtained as a bulk powder, it exhibits a lowvolumetric density andpoor thermal conductivitydboth ofwhichareundesirable characteristics for ahydrogen storage material. Here we explor...

2017
Marios I. Poulakis Antonis G. Gotsis Angeliki Alexiou

One of the most significant 5G technology enablers will be Device-to-Device (D2D) communications. D2D communications constitute a promising way to improve spectral, energy and latency performance, exploiting the physical proximity of communicating devices and increasing resource utilization. Furthermore, network infrastructure densification has been considered as one of the most substantial met...

2010
Donghua Jia Muhammad T. Afzal Meng Gong Alemayehu H. Bedane

Mechanical densification of wood involves compressing the wood in radial direction using heat, water and steam to produce a higher density surface exhibiting better mechanical properties. The densified wood is an environmentally friendly product that presents new opportunities for the wood products industry. Wood surface densification involves both soaking and heating. The objective of this stu...

2014
Marta Ziemnicka-Sylwester

TiB2-Cu cermets with various volume fractions of copper (from 3 to 30 vol. %) were produced via liquid phase sintering at the temperature range 1100–1200 °C in vacuum using spark plasma sintering (SPS) technique. Full densification could not be achieved as the consequence of poor wettability and vaporizing Cu. The quantitative Rietveld analysis indicated that insignificant reduction in Cu conte...

2013
Johannes FREITAG Sepp KIPFSTUHL Thomas LAEPPLE Frank WILHELMS Alfred Wegener

A new densification model, which simulates the effect of impurities on the densification of polar firn, is presented. The classical densification models of Herron and Langway (1980) and Pimienta and Barnola (Barnola and others, 1991) are modified by assuming that the activation energy for deformation is reduced by the impurities. Motivated by recent observations, the impurity effect is formulat...

, ,

In this research, the densification of magnesia nanopowder with a mean particle size of about 100 nm was investigated by spark plasma sintering undera pressures of 80 MPa and at temperature range from 1000 °C to 1400 °C and a heating rate of 50 °C/min for 20 minutes. The density of the samples slowly increased with increasing sintering temperatures to 1200 °C. Afterwards, with more increasing o...

Journal: :علوم و تکنولوژی پلیمر 0
مریم حاجی حسینی آرش پیامی سیدرضا غفاریان امیرمسعود رضادوست

in the processing of carbon/carbon composites using polymer resin as the matrix precursor, it is inevitable that a porous structure was formed after carbonization. as a result, densification by liquid phase impregnation followed by recarbonization is required to obtain a densified composite. consequently, the char formability of resin is an important factor in reducing the number of densificati...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید