Different percentages of CuO and ZnO were added into a local kaolin ceramic-based powder (DD3) with without ZrO2. The modified powders first characterized, then, test for the photocatalytic degradation dyes orange II (OII) was carried out. DD3 that obtained addition ZrO2, ZnO, CuO, prepared by two different methods have shown large very fast activity. Discoloration ratios about 93.6% 100% reach...

Various nanocomposites of TiO2, ZnO and ZrO2 decorated single wall Carbon nanotubes (SWNTs) were fabricated by facile and template free continuous ultrasonication/stirring of virgin metal oxide nanopowders and SWNTs in ethanol under UV-light illumination. The TEM micrographs showed that nanoparticles (NPs) were uniformly dispersed and bonded on the surface of SWNTs. The results of XRD as well a...

The antibacterial and antibiofilm activity of chemically synthesized pure and Cu doped ZnO nanoparticles against marine biofilm forming bacteria has been reported for the first time. The synthesized nanoparticles were characterized using PXRD, FTIR and SEM which confirmed the formation of phase pure nanostructured zinc oxides. The antibacterial and antibiofilm activities of the synthesized nano...

a r t i c l e i n f o The in-situ synthesis of Cu/ZnO crystalline nanofibers is presented. The composite nanofibers are formed through the calcination and reduction of as-electrospun fibers consisting of poly(vinyl pyrrolidone) as well as Cu and ZnO precursors. The crystal structure and morphology of the synthesized fibers were characterized using X-ray diffraction, scanning electron microscopy...

In this work, a facile and versatile solution route was used to fabricate room-temperature ferromagnetic fish bone-like, pteridophyte-like, poplar flower-like, cotton-like Cu@Cu2O architectures and golfball-like Cu@ZnO architecture. The ferromagnetic origins in these architectures were found to be around metal-semiconductor interfaces and defects, and the root cause for their ferromagnetism lay...

Zincian georgeite, an amorphous copper-zinc hydroxycarbonate, has been prepared by co-precipitation using acetate salts and ammonium carbonate. Incorporation of zinc into the georgeite phase and mild ageing conditions inhibits crystallisation into zincian malachite or aurichalcite. This zincian georgeite precursor was used to prepare a Cu/ZnO catalyst, which exhibits a superior performance to a...

Zincian georgeite, an amorphous copper–zinc hydroxycarbonate, has been prepared by co-precipitation using acetate salts and ammonium carbonate. Incorporation of zinc into the georgeite phase and mild ageing conditions inhibits crystallisation into zincian malachite or aurichalcite. This zincian georgeite precursor was used to prepare a Cu/ZnO catalyst, which exhibits a superior performance to a...

One-dimensional (1D) metal oxide nanomaterials, such as zinc oxide (ZnO) nanowires and nanobelts (or nanoribbons), have recently attracted immense attention due to their sizeand shape-dependent optical, mechanical, and electronic properties. In stark contrast, investigations of 1D zirconia (ZrO2) and hafnia (HfO2) nanomaterials remain unexploited largely because of the formidable challenges ass...

The metal-doping into the photocatalyst was evaluated for the photocatalytic degradation of bisphenol A in aqueous solution with ZnO powder. Au/ZnO, Ag/ZnO and Cu/ZnO were tested in the present work. Ag-doping ZnO was effective for the improvement of efficiency for the photocatalytic degradation of bisphenol A in water. The optimum doping concentration of silver was found to be 3 wt%. The pseud...

This study evaluated the pH, calcium ion release and antimicrobial activity of EndoBinder (EB), containing different radiopacifiers: bismuth oxide (Bi2O3), zinc oxide (ZnO) or zirconium oxide (ZrO2), in comparison to MTA. For pH and calcium ion release tests, 5 specimens per group (n=5) were immersed into 10 mL of distilled and deionized water at 37°C. After 2, 4, 12, 24, 48 h; 7, 14 and 28 day...