Image processing technologies are proposed to quantify crack patterns. On the basis of the technologies, a software “Crack Image Analysis System” (CIAS) has been developed. An image of soil crack network is used as an example to illustrate the image processing technologies and the operations of the CIAS. The quantification of the crack image involves the following three steps: image segmentatio...

To better understand the relationship between the nucleation and growth of defects and the local stresses and phase changes that cause them, we need both imaging and stress mapping. Here, we explore how this can be achieved by bringing together synchrotron X-ray diffraction and tomographic imaging. Conventionally, these are undertaken on separate synchrotron beamlines; however, instruments capa...

Fatigue crack growth is examined in P/M 2124 aluminum alloys reinforced with SiC particles (SiCp) and whiskers (SiCw) over a wide spectrum of growth rates from 10 to 10 m per cycle. Effects of aging treatment, orientation of crack growth direction with respect to the rolling direction, mean stress (or stress ratio), and reinforcement volume percent on the fatigue crack growth threshold are inve...

As a first step towards a new crack healing methodology for cyclic loading, this paper examines two promising crack-tip shielding mechanisms during fatigue of a microcapsule toughened epoxy. Artificial crack closure is achieved by injecting precatalyzed monomer into the crack plane to form a polymer wedge at the crack tip. The effect of wedge geometry is also considered, as dictated by crack lo...

Fatigue crack growth is a complex process that involves interactions between many elements ranging across several length scales. This work provides an in-depth, experimental study of fatigue crack growth and the relationships between four of these elements: strain field, microstructure, crack path, and crack growth rate. Multiple data sets were acquired for fatigue crack growth in a nickel-base...

in this paper, the range doppler algorithm (rda) for synthetic aperture radar moving on a ballistic trajectory is presented. the 3-dimension acceleration and non-uniform trajectory cause decreases in efficiency of conventional imaging algorithms. in this paper, the analytical expression for the 2-d signal spectrum for ballistic trajectory using taylor series expansion and series reversion is de...

In this paper an analytical crack propagation scenario is proposed which assumes that a crack propagates in the tooth root in both the crack depth direction and the tooth width direction, and which is more reasonable and realistic for non-uniform load distribution cases than the other presented scenarios. An analytical approach is used for quantifying the loss of time-varying gear mesh stiffnes...

Crack tip shielding phenomena, whereby the "effective crack-driving force" actually experienced at the crack tip is locally reduced, are examined with reference to fatigue crack propagation behavior in metals, composites and ceramics. Sources of shielding are briefly described in terms of mechanisms relying on the production of elastically constrained zones which envelop the crack (zone shieldi...

* Corresponding author; Email: [email protected] ABSTRACT An important task in mixed-mode fracture analysis and prediction is the simulation of crack growth under mixed-mode conditions. To complete such a task, one must have (a) a computer code capable of handling the kinematics of general crack growth and determining the stress and deformation states during crack growth, and (b) a fracture crit...

A Zener±Stroh crack is formed by coalescing a dislocation pileup and therefore is a net dislocation loaded crack. In this paper, the interaction between a Zener±Stroch crack and surrounding cylindrical ®bers in a ®ber-reinforced composite material has been investigated. The crack is located in the matrix and near a ®ber, while the in ̄uence of other ®bers on the crack is considered through the t...