Determination of optimal conditions of machining parameters is important to reduce the production cost and achieve the desired surface quality. This paper investigates the influence of cutting parameters on surface roughness and natural frequency in turning of aluminum alloy AA2024. The experiments were performed at the lathe machine using two different cutting tools made of AISI 5140 and carbi...

The condition of a cutting tool is an important factor in manufacturing processes. Tool wear has a strong influence on the cutting forces, resulting in a poor surface finish and impacting on the dimensional tolerance of the workpiece. Therefore, the use of a dynamometer during machining to measure cutting forces is a well-known approach but it has several limitations such as high cost, poor per...

Efficient cutting design is essential to reduce the costs of production in the open die forging industry. This article discusses a slab cutting design problem that occurs when parallel piped items are cut from raw material steel slabs with varying widths and lengths to meet a volume requirement. The problem is modeled as a two-dimensional cutting stock problem or bin packing problem with size-c...

This article seeks to examine the conflict between non-cost-conscious medical malpractice liability standards and health care cost cutting measures within the context of Accountable Care Organizations ("ACOs") under the new health care reform law. This article begins by providing an overview of the high level of health care spending within the United States health care system in order to provid...

The goal of this research is to improve the productivity of Numerically Controlled (NC) machine tools by optimization of feedrate settings. In this paper we compare the maximum cutting forces and cutting times using traditional methods with those achieved using the optimization methods developed in our research. Results indicate that significant productivity gains can be realized using the feed...

the built up layer thickness in secondary deformation zone is one of the important parameters in metal cutting process. the built up layer (bul) is formed in second deformation zone near the tool-chip interface in the back of the chip. this parameter influences the tool life and machined surface quality. this bul should not be confused with the built up edge (bue). the deformation of the bul in...

Abstract—Water miscible cutting fluids are conventionally used to lubricate and cool the machining zone. But issues related to health hazards, maintenance and disposal costs have limited their usage, leading to application of Minimum Quantity Lubrication (MQL). To increase the effectiveness of MQL, nanocutting fluids are proposed. In the present work, water miscible nanographite cutting fluids ...

Burning fuels with high sulfur content leads to SOx emissions, especially SO2, which various environmental and health problems. The maritime sector is responsible for 13% of the global anthropogenic emissions SO2. Thus, International Maritime Organization (IMO) has issued a protocol, known as MARPOL Annex VI, aims further limit SO2 derived from ships along NOx, particulate matter volatile organ...

Cutting fluids, usually in the form of a liquid, are applied to the chip formation zone in order to improve the cutting conditions. Cutting fluid can be expensive and represents a biological and environmental hazard that requires proper recycling and disposal, thus adding to the cost of the machining operation. For these reasons dry cutting or dry machining has become an increasingly important ...