The aim of this study is to evaluate the moisture effect on the strength of concrete specimens that has completely cured. This study is also aimed to develop relations that can be used to determine the properties of concrete with different moisture contents that are normally experienced in outside conditions. Numerous compressions and split tensile tests are performed. In order to better unders...

Recent scientific concerns to achieve sustainability in construction have suggested the implementation of using recycled aggregate in concrete because it has the potential to reduce the demand for extraction of natural raw materials and decrease the volume of wastes landfilled. In this respect, this study aims to investigate the suitability of using ceramic tile (CT) and ceramic sanitary (CS) w...

Porous concrete is a mixture of cement and water that may contain fine grains, which play a role in water transfer and permeability. Porous concrete can act as a drain to pass rainwater and recharge groundwater. In this study, 25%, 50%, 75%, and 100% zeolite were used to replace the coarse aggregates in porous concrete. The effects of the zeolite on the compressive strength, permeability coeffi...

the present work has been performed to eliminate sewage dry sludge of alborze city wastewater treatment plant by using them as fine aggregate in concrete. on this basis, at first the selected dry sludge was analyzed for xrd and xrf for crystalline phases and chemical composition, respectively. the results showed that more than 50% of the sludge is formed of sio2 and it had more than 20% organic...

an experimental program was carried out to investigate the behavior of steel, fiber reinforced concrete (sfrc) under abrasion and cycles of freeze and them. compression and flexural tests were also performed in order to reach a comprehensive conclusion of the response. in total, over 200 specimens were tested the test variables included two concrete strength., (i. e., 28 mpa as normal strength ...

In this study two series of self compacting concrete mixtures were prepared with 100% coarse recycled concrete aggregates and different percentages of 0%, 20%, 40%, 60%, 80% and 100% fine recycled concrete aggregates. In series I and II the water to binder ratios were 0.50 and 0.45, respectively. The cement content was kept 350 3 m kg for those mixtures that don't have any Nano-Silica. To impro...

In the current study two methods are evaluated for predicting the compressive strength of concrete containing metakaolin. Adaptive neuro-fuzzy inference system (ANFIS) model and stepwise regression (SR) model are developed as a reliable modeling method for simulating and predicting the compressive strength of concrete containing metakaolin at the different ages. The required data in training an...

this paper is based on an experimental research that examined the effects of concrete`s major parameters on durability of concrete pavements and curbs under freezing and thawing cycles. these parameters include concrete mix design parameters such as water-cement ratio, fine aggregate percentage and using air entraining admixture and simulating real freeze-thaw cycles that infrastructures underg...

In this research, 210 concrete cube specimens (15cm) were made replacing 0, 5, 10, 15, 20, 25, 30, 35, 40, 50, and 60 percent of slag powder from Isfahan Steel Mill for cement. The control specimens were made with 350 kg/m3 cement content and the water cement ratio in all specimens was 0.51. The Slump value and compressive strength of concrete specimens in 7, 28 and 90 days were obtained and th...

This work has as objective to study the influence of mixing hour in the concrete properties such as workability and compressive strength in hot and cold weather conditions from an industrially applied point of view. The foremost studied variable was the concrete mixing hour, having used five mixing hours for every weather conditions. For each mixing hour, were carried out three concrete batches...