Due to their widespread availability, sandstones are commonly used as a natural stone for buildings, monuments and sculptures. In thecurrent study, nine sandstone samples from the Upper Red Formation (specified by the letters A, B, C, CG, S, S1, Sh, Tr and Min)were studied from a petrophysical point of view and their durability was evaluated. Then, their suitability as building stones wasassess...

In this paper, after collecting the rock samples from eight mines and one high way slope, the tests for determination of dry density, Uniaxial Compressive Strength, tensile Strength (Brazilian Test), elastic modulus, Schmidt hammer rebound number have been done on samples. In addition, in order to calculating the mean size of rock grains, quartz content, hardness and abrasivity, a thin sections...

------------------------------------------------------Abstract---------------------------------------------------------Estimation of strength properties (uniaxial compressive and point load) from physical properties (density, porosity and rebound hardness) of shale rock type from Kogi State, Nigeria was investigated. The shale rock types were sampled and tested for their properties through in-s...

Gold nanostructured materials exhibit important size- and shape-dependent properties that enable a wide variety of applications in photocatalysis, nanoelectronics and phototherapy. Here we show the use of superfast dynamic compression to synthesize extended gold nanostructures, such as nanorods, nanowires and nanosheets, with nanosecond coalescence times. Using a pulsed power generator, we ramp...

INTRODUCTION The compressive loading on the cervical spine results the activation of the neck muscles to counterbalance their impact on the posture of the joint. Wearing a helmet in many sports or military and work activities increases the compressive loading. The compressive load is estimated to range from 120 to 1200N [1]. In this current study and based on our finite element model, we aim to...

Polyurea is a special type of elastomer that features fast setting time as well as good chemical and fire resistance. It has also good mechanical properties such as its high toughness-to-density ratio and high strain rate-sensitivity, so its application is recently extended to structural purpose to form sandwich-type or multi-layered plates. Those structures can be used for retrofitting of mili...

We present investigations on the plastic deformation behavior of a brittle bulk amorphous alloy by simple uniaxial compressive loading at room temperature. A patterning is possible by cold-plastic forming of the typically brittle Hf-based bulk amorphous alloy through controlling homogenous flow without the need for thermal energy or shaping at elevated temperatures. The experimental evidence su...

A review on the recent development in the non-linear flutter and thermal buckling of an FGM panel under the combined effect of elevated temperature conditions and aerodynamic loading is investigated using a finite element model based on the thin plate theory and von Karman straindisplacement relations to account for moderately large deflection. It is found that the temperature increase has an a...

Steel embedded in cement mortar in the uniaxial compressive stress direction was found to decrease by 80% the compressive longitudinal strain at a given stress and increase by 300% the tensile transverse strain at a given longitudinal strain. The former effect is due to longitudinal confinement of mortar by steel. The latter is due to debonding at the steel-mortar interface. © 1999 Elsevier Sci...

In this paper, the compressive behavior of fiber-reinforced concrete with end-hooked steel fibers has been investigated through a uniaxial compression test in which the variables were concrete compressive strength, fiber volumetric ratio, and fiber aspect ratio (length to diameter). In order to minimize the effect of specimen size on fiber distribution, 48 cylinder specimens 150 mm in diameter ...