AIMS To evaluate a safe sputum processing method for detection of tuberculosis in developing countries. METHODS A sample processing method was developed in which acid fast bacilli were killed with 1% sodium hypochlorite and concentrated by flotation on a layer of xylene before staining by the Ziehl Neelsen or auramine O methods. RESULTS Best results were obtained by auramine O staining afte...

Flotation deinking of old newsprint (ONP) using polydiallyldimethylammonium chloride (polyDADMAC) as the only deinking agent was studied. The results demonstrate that polyDADMAC can neutralize dissolved anionics to form small particles. These small particles, together with ink, filler, and fines, strongly adsorbed onto air bubble surfaces and functioned as particle foaming agents. Therefore, no...

The paper discusses two procedures of flotation of difficult-to-float oxidized coal. The first one is the normal flotation procedure which relies on wetting coal with water followed by addition of flotation reagents (dodecane, dodecyl tetraoxyethelene ether (C12E4), and 1-pentanol). The second, direct contact procedure consists of mixing pure reagents with dry coal followed by addition of water...

The residence time of liquid and solid was determined in flotation banks of mechanical cells and flotation columns at Salvador Division, Codelco-Chile. The estimation was developed from residence time distribution (RTD) measurements using radioactive tracers. Results allowed the estimation of effective pulp volumes in flotation banks and columns. It was found that industrial flotation banks are...

Fifty canine fecal samples were evaluated by five flotation procedures to compare the sensitivity of the zinc sulfate (ZnSO4) centrifugation flotation test with ZnSO4 flotation tests using benchtop incubation during the flotation period. One or more parasite species were detected in 40 samples. Results showed that centrifugation with ZnSO4 solution was significantly more likely to detect a posi...

The metallurgical performance of the column flotation process is determined by the concentrate grade and recovery. Although the former can be continuously measured using an on-stream analyzer, the latter must be estimated by a material balance calculation based on seldom verified steady-state assumptions. Consequently, the automatic control and optimization of flotation columns should be perfor...

This study investigates the flotation performance of a representative hard coal slime sample (d80 particle size of minus 0.2 mm) obtained from the Prosper-Haniel coal preparation plant located in Bottrop, Germany. Flotation was carried out with a newly designed flotation cell refurbished from an old ultrasonic cleaning bath (2.5 L volume) equipped with a single frequency (35 kHz) and two differ...

The removal of heavy metal ions from wastewater by sorptive flotation using Amberlite IR120 as a resin, and column, was investigated. A combined two-stage process is proposed an alternative the metals aqueous solutions. first stage sorption onto followed dispersed-air flotation. on depending contact time, pH, resin dosage, initial concentration studied in batch method .Various parameters such a...

The aim of this study is to compare the effect of the ultrasonic pre treatment on the removal of heavy metals (Iron, Zinc and Copper) from Acid Mine Drainage (AMD) by Denver Cell flotation. Synthetic AMD and individual metal solutions are used in the initial experiments to optimise the process conditions for real AMD. Three different process methods, ultrasound treatment followed by Denver flot...