In this work, cold-rolling was utilized to induce a high density of crystal defects in Al0.3CoCrFeNi high-entropy alloys. The effects annealing temperature on static recrystallization, precipitation behavior and mechanical properties were investigated. With increasing from 590 °C 800 °C, the area fraction recrystallized region increases 26.9% 93.9%. Cold-rolling deformation largely promotes B2 ...

Metal matrix nanocomposites (MMNCs) reinforced by carbon nanotubes (CNTs) are good candidates to produce structural components in the mobility industry, given their unique properties. The manufacture of these can involve plastic deformation. Therefore, it is crucial understand whether reinforcement influence deformation behaviour nanocomposites. Thus, this work aims study MMNCs, importance and ...

An investigation has been carried out on the texture of Ti-44Ni-5Cu (at %) shape memory alloy wire. The texture of the B2 and monoclinic phases has been determined as a function of the degree of cold deformation during the drawing process and the number of cycles on thermomechanical cycling. After cold drawing and anlealing (823 K, 180 s ) under tensile stress, the [110], [li~] [loll and [loll ...

Deformation microstructure and texture in a cold-rolled austenitic steel 310S with low stacking fault energy (SFE) have been investigated by SEM and TEM. When 310S plates were rolled by 95% in thickness reduction, a remarkable development of the brass-type preferred orientation was confirmed by X-ray diffraction. SEM observations of the specimens with such texture exhibited a layered structure ...

OBJECTIVES In Poland, occupational exposure to cold microclimate is quite common (5.1 workers/1000 occupationally active people). Reports on health effects of this exposure are rather scarce. The aim of the study was to evaluate the physiological reaction in workers occupationally exposed to cold microclimate. MATERIALS AND METHODS Examinations were performed in a group of 102 workers (41 wom...

Grit blasting is a surface plastic deformation technique aimed to increase the surface area available for bone/implant apposition, which contributes to improve fixation and mechanical stability of Ti-6Al-4V implants. Besides roughening, grit blasting also causes surface contamination with embedded grit particles and subtle subsurface microstructural changes that, although does not challenge the...

It has recently been shown that Severe Plastic Deformation (SPD) techniques could be used to obtain nanostructured metal hydrides with enhanced hydrogen sorption properties. In this paper we review the different SPD techniques used on metal hydrides and present some specific cases of the effect of cold rolling on the hydrogen storage properties and crystal structure of various types of metal hy...