Wet flue gas desulphurization (FGD) plants with forced oxidation, installed at coal and oil fired power plants for removal of SO2(g), must produce gypsum of high quality. However, quality issues such as an excessive moisture content, due to poor gypsum dewatering properties, may occur from time to time. In this work, the particle size distribution, morphology, and filtration rate of wet FGD gyp...

Coal combustion by-products such as fly ash (FA), brine and CO2 from coal fired power plants have the potential to impact negatively on the environment. Reaction of CO2 with FA/ brine slurry can potentially provide a viable route for CO2 sequestration through formation of mineral carbonates. Fractionated FA has varying amounts of CaO which not only increases the brine pH but can also be convert...

This study experimentally investigates the effect of multi-walled carbon nanotubes (MWNT’s), as a reinforcing material, on the physical properties of heavy-weight oil well cements. A candidate well is selected and the properties of the cement slurry used in a problematic section of the well are tested in the laboratory. Carbon nanotubes (CNT’s) are added as fibers to the cement slurry and the i...

Coal swelling in the presence of water as well as CO2 is a well-known phenomenon, and these may affect the permeability of coal. Quantifying swelling effects is becoming an important issue to verify the suitability of particular coal seams for CO2-enhanced coal bed methane recovery projects. In this report, coal swelling experiments using a visualization method in the CO2 supercritical conditio...

Article history: Received: 18.6.2015. Received in revised form: 29.11.2015. Accepted: 1.12.2015. Dynamic damage evolution during coal seam pulse water infusion is simulated through secondary development of ABAQUS software in this paper in order to obtain the rule of dynamic damage evolution of coal seam around the pulse water infusion hole. It provides a new quantitative method of determining c...