In the present paper, changes in mechanical properties of Portland cement-based mortars due to the addition of carbon nanotubes (CNT) and corrosion of embedded steel rebars in CNT cement pastes are reported. Bending strength, compression strength, porosity and density of mortars were determined and related to the CNT dosages. CNT cement paste specimens were exposed to carbonation and chloride a...

Carbon nanotube (CNT) reinforced 316L stainless steel (SS) composites were fabricated by laser powder bed fusion (LPBF) additive manufacturing (AM). This study focuses on microstructure evolution, hardness, and wear behavior. The behavior for AM SS 1 wt% CNT/316L was studied a dry sliding test under normal loads of 10, 15, 25 N. addition CNT to led the change solidification mode from cellular/c...

High-performance poly(1,4-butylene terephthalate) (PBT) nanocomposites have been developed via the consideration of phosphorus-containing agents and amino-carbon nanotube (A-CNT). One-pot functionalization method has been adopted to prepare functionalized CNTs via the reaction between A-CNT and different oxidation state phosphorus-containing agents, including chlorodiphenylphosphine (DPP-Cl), d...

Carbon nanotube (CNT) arrays can be drawn into a web and then twisted into threads. These CNT threads contain thousands of carbon nanotubes in their cross-section and can be further composed into yarns consisting of one or more threads. CNT yarns exhibit significant mechanical stiffness and strength and low electrical resistivity. More importantly, CNT yarns exhibit piezoresistance that could b...

Vertically aligned carbon nanotube (CNT) arrays are grown on a moving substrate, demonstrating continuous growth of nanoscale materials with long-range order. A cold-wall chamber with an oscillating moving platform is used to locally heat a silicon growth substrate coated with an Fe/Al2O3 catalyst film for CNT growth via chemical vapor deposition. The reactant gases are introduced over the subs...

Carbon nanotube (CNT) based continuous fiber, a CNT assembly that could retain the superb properties of individual CNTs on a macroscopic scale, has emerged as a promising candidate for reinforcement in multifunctional composites. While existing research has extensively examined their short-term mechanical properties based upon quasi-static measurements, the long-term durability of CNT fibers ha...

PURPOSE Stimulation of toll-like receptor-9 (TLR9) by CpG oligodeoxynucleotides (CpG) has been shown to counteract the immunosuppressive microenvironment and to inhibit tumor growth in glioma models. Because TLR9 is located intracellularly, we hypothesized that methods that enhance its internalization may also potentiate its immunostimulatory response. The goal of this study was to evaluate car...

The energetics of topological defects (TDs) in carbon nanotubes (CNTs) and their kinetic healing during the catalytic growth are explored theoretically. Our study indicates that, with the assistance of a metal catalyst, TDs formed during the addition of C atoms can be efficiently healed at the CNT-catalyst interface. Theoretically, a TD-free CNT wall with 10(8)-10(11) carbon atoms is achievable...

A simple but effective method has been developed to controllably extract carbon nanotubes (CNTs) from their vertically aligned arrays on growth substrates. The intrinsic micron-scale roughness of the CNT surface enables the protruding nanotubes to make good contact with an adhesive layer which can then remove them from the array on the growth substrate. This approach allows us to manage and tai...

Article history: Received 28 October 2013 Received in revised form 5 December 2013 Accepted 26 December 2013 Available online 24 January 2014 In this work, we propose two carbon nanotube (CNT) network fabrication processes, the normal spin rate coating (NR) and the slow spin rate coating (SR), and two interconnect structures, the single layer structure (SL) and the double layer structure (DL), ...