The aim of this article is to evaluate marginal and internal fit between the all-ceramic crowns manufactured by the conventional press-dental laboratory and CAD/CAM systems. Methods: Tooth #14 was prepared per standard specification to receive an all-ceramic crown restoration. Forty-five prep tooth #14 were duplicated and randomly divided into three groups (n=15). All-ceramic CAD/CAM system (Gr...

The purpose of this study was to investigate how water aging of the resin cement influences the stress distribution in all-ceramic crowns and if there is an increase in the propensity for crown failure. The failure of all-ceramic crowns attributed to cement degradation was explored using a combination of experimental and numerical methods. Sectioned all-ceramic crown specimens were fabricated o...

PURPOSE Marginal fit is a very important factor considering the restoration's long-term success. However, adding porcelain to copings can cause distortion and lead to an inadequate fit which exposes more luting material to the oral environment and causes secondary caries. The purpose of this study was to compare the marginal fit of 2 different all-ceramic crown systems before and after porcelai...

PURPOSE Different types of tooth preparations influence the marginal precision of zirconium-oxide based ceramic single crowns. In this in vivo study, the marginal fits of zirconium-oxide based ceramic single crowns with vertical and horizontal finish lines were compared. MATERIALS AND METHODS Forty-six teeth were chosen in eight patients indicated for extraction for implant placement. CAD/CAM...

Christian Brenes: CAD/CAM MATERIALS AND TECHNOLOGIES FOR ALL CERAMIC RESTORATIONS: A REVIEW OF THE LITERATURE (Under the direction of Ibrahim Duqum) Objectives: Evaluate the marginal fit of CAD/CAM all ceramic crowns made from lithium disilicate and zirconia using two different fabrication protocols (model and model-less). METHODS: Forty anterior all ceramic restorations (20 lithium disilicate,...

The aim of the current investigation was to evaluate the fracture resistance of one-piece zirconia oral implants with and without all-ceramic incisor crowns after long-term thermomechanical cycling. A total of 48 implants were evaluated. The groups with crowns (C, 24 samples) and without crowns (N, 24 samples) were subdivided according to the loading protocol, resulting in three groups of 8 sam...

UNLABELLED Composite resin and metallic posts are the materials most employed for reconstruction of teeth presenting partial or total destruction of crowns. Resin-based cements have been widely used for cementation of ceramic crowns. The success of cementation depends on the achievement of adequate cement curing. OBJECTIVES To evaluate the microhardness of Variolink® II (Ivoclar Vivadent, Sch...

amelogenesis imperfecta is a heterogeneous group of hereditary disorders. its treatment continues throughout the patients' childhood and adolescence and consists of advanced restorative care in severe cases. a thorough prosthodontic treatment plan including orthognatic surgery, full veneer crowns and all ceramic anterior crowns is presented in this clinical report.

The aim of this study was to evaluate the marginal adaptation of Turkom-Cera all-ceramic crowns compared to In-Ceram and Procera AllCeram systems. The influence of finish line design (chamfer or shoulder) on the marginal adaptation of Turkom-Cera all-ceramic crowns was also investigated. Thirty human premolars were prepared with chamfer margins and assigned to either the Turkom-Cera, In-Ceram, ...