This study reports the competitive adsorption of Ni(II), Cd(II) and Cr(VI) onto sunflower waste biomass carbons, viz. sunflower head carbon and sunflower stem carbon from multi-metal aqueous solution. The adsorption capacity of the adsorbents was highest in mono-metal system but decreased with increase in the number of coions. The adsorption capacity in mono-metal system was 0.32 and 0.45 mM/g ...

In this studies removal of some ions such as Pb(II), Cd(II) and Cu(II) by single walled carbon nanotubes (SWCNTs) and carboxylate functionalized (SWCNTs-COOH) from aqueous solution were studied. The effect of pH, contact time, initial concentration, ionic strength, temperature, equilibrium, models and thermodynamic parameters on the removal of ions was investigated. The results indicated that L...

In this study, the removal of cadmium and lead ions from aqueous solution by nanocrystalline magnetite was investigated. The nanocrystalline magnetite was synthesized by mechanochemical activation of hematite in a high energy planetary mill in argon atmosphere for 45 hours. The ability of the synthesized nanocrystalline magnetite for removal of Cd(II) and Pb(II) from aqueous solutions was studi...

Heavy metals are considered as one of the important pollutants in the environment, particularly in the aquatic ecosystems. The presence of cadmium in food chain is toxic to human health. Different physical or chemical methods have been used for removing heavy metal ions in the water and wastewater treatments. The aim of this work was to assess the possibility of Cd removal from aqueous solution...

This study investigated the adsorption of the heavy metal ions Pb(II), Cu(II), Cd(II), Zn(II), and Ni(II) on a lignin isolated from black liquor, a waste product of the paper industry. Lignin has affinity with metal ions in the following order: Pb(II)>Cu(II)>Cd(II)>Zn(II)>Ni(II). The adsorption kinetic data can be described well with a pseudosecond-order model and the equilibrium data can be fi...

A novel composite adsorbent, Silica aerogel activated carbon was synthesized by sol-gel process atambient pressure drying method. The composite was characterized by Fourier transform infraredspectroscopy (FT-IR), scanning electron microscopy (SEM), differential scanning calorimetry(DSC) and Nitrogen adsorption / desorption isotherms (BET).In the present study, the mentioned adsorbent was used m...

Recently, more and more attention has been centered on developing cheaper, highly efficient, environmentally friendly adsorbents for the removal of metal ions from industrial effluents. The present work deals with the removal of metal ions from an aqueous solution using a highly efficient, biodegradable adsorbent from hydrogel prepared by the free radical graft polymerization of sugarcane bagas...

The adsorption of Cu, Cd, Ni, Zn, and Cr from synthetic solutions on powdered activated carbon (PAC), activated sludge, and dried sludge were investigated under laboratory conditions to assess its ability to remove heavy metals. The adsorption efficiency increased rapidly within the first 30 min and then slowed down as it approached a steady state after 5 h of contact time. The results showed t...

Activated carbon prepared from neem oilcake, by pyrolysis accompanied with microwave oven activation is evaluated for the adsorption of Cd(II) and Ni(II) from wastewater. Parameters such as pH, agitation time, metal ion concentration and adsorbent dose are studied. The percent removal increased with pH from 2.0 to 7.0. The adsorption data fit well with Langmuir, Freundlich and Temkin isotherm m...

Little information is available on chemical forms of heavy metals on integrate plant roots. KNO3 (1 M), 0.05M EDTA at pH6 and 0.01 M HCl were used sequentially to extract the exchangeable, complexed and precipitated forms of Cu(II) and Cd(II) from soybean roots and then to investigate chemical form distribution of Cu(II) and Cd(II) on soybean roots. Cu(II) and Cd(II) adsorbed on soybean roots w...