Undoped and Sn, Ni-doped nanostructured ZnO thin films were deposited on glass substrates using a successive ionic layer adsorption and reaction (SILAR) method at room temperature. The SILAR deposited zinc oxide films have been rapid photothermal processing (RPP) at various temperatures to study the effect of annealing on the sensing properties. Structural, electrical and sensing properties wer...

Metal adhesion on metal oxides is strongly controlled by the oxide surface structure and composition, but lack of control over the surface conditions often limits the possibilities to exploit this in opto- and micro-electronics applications and heterogeneous catalysis where nanostructural control is of utmost importance. The Cu/ZnO system is among the most investigated of such systems in model ...

The influence of experimental conditions on the formation of ZnO fibers by electrospinning has been investigated. The electrospinning of a viscous suspension containing polyvinylpyrrolidone and zinc acetate in C2H5OH/H2O produced very long fibers (several hundred μm). Upon calcination a thin deposit of precursor fibers at 400 or 500 °C for 1 h the fibers consisting of ZnO nanoparticles were obt...

nanostructured zinc oxide (zno) materials have received considerable interest from scientists due to their remarkable performance in electronics, optics and photonics. zno nanoparticles were synthesized by co-precipitation method. zno nanoparticles were synthesized using zn(no3)3 and k2co3 precursors. the structure of the obtained product was confirmed by the powder x-ray diffraction (xrd) anal...

The present study investigated the protective effect of thymoquinone (TQ), against cadmium-induced kidney injury in rats. Cadmium chloride (1.2 mg Cd/kg/day, s.c.), was given for nine weeks. TQ treatment (40 mg/kg/day, p.o.) started on the same day of cadmium administration and continued for nine weeks. TQ significantly decreased serum creatinine, renal malondialdehyde and nitric oxide, and sig...

In this research, nanoimprint lithography (NIL) was used for patterning crystalline zinc oxide (ZnO) nanorods on the silicon substrate. To fabricate nano-patterned ZnO nanorods, patterning of an n-octadecyltrichlorosilane (OTS) self-assembled monolayers (SAMs) on SiO2 substrate was prepared by the polymer mask using NI. The ZnO seed layer was selectively coated only on the hydrophilic SiO2 surf...

We exploit the utilization of two-dimensional (2D) molybdenum oxide nanoflakes as a co-catalyst for ZnO nanorods (NRs) to enhance their photocatalytic performance. The 2D nanoflakes of orthorhombic α-MoO3 were synthesized through a sonication-aided exfoliation technique. The 2D MoO3 nanoflakes can be further converted to substoichiometric quasi-metallic MoO3-x by using UV irradiation. Subsequen...

Physiochemical interactions which occur at the surfaces of oxide materials can significantly impair their performance in many device applications. As a result, surface passivation of oxide materials has been attempted via several deposition methods and with a number of different inert materials. Here, we demonstrate a novel approach to passivate the surface of a versatile semiconducting oxide, ...

elastomer compound based on nr/br was prepared using different kinds of nano-zno and zno. the effect of zinc oxide as an activator of sulfur cure on the mechanical and morphological properties of the compound was studied. the result of the mechanical properties showed that the tensile strength, elongation-at-break, resilience, and abrasion resistance of the compound prepared by zno (4 phr) are ...

In the emerging issue of increased multi-resistant properties in food borne pathogens, zinc oxide (ZnO) and nano-particle zinc oxide (nano-ZnO) are being used increasingly as antimicrobial agents. Thus, the minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of nano-ZnO towards pathogens microbes Bacillus subtilus NRRL B-543, Bacillus megaterium ATCC 25848, Staph...