Currently, aluminum oxide stacked with silicon nitride (Al2O3/SiNx:H) is a promising rear passivation material for high-efficiency P-type passivated emitter and rear cell (PERC). It has been indicated that atomic layer deposition system (ALD) is much more suitable to prepare high-quality Al2O3 films than plasma-enhanced chemical vapor deposition system and other process techniques. In this stud...

calcium aluminates (ca) are the most important hydraulically setting cements used for preparing refractory castables, because they develop high strength at very early ages after placements.  the anhydrous phases of this kind of cements are ca, ca2 and traces of c12a7 and alpha-alumina. the major hydraulic phase in all of the ca cements including ciment fondue is ca. once hydrated, it starts to ...

The chemical degradation of exfoliated black phosphorus (BP) when exposed to ambient conditions can be effectively suppressed via the deposition of Al2O3 dielectric on the BP surface. A good understanding of the interactions between the BP layer and Al2O3 dielectric is important for practical device applications. In the presented paper, first principles calculations have been performed to study...

The Cu/Al2O3 catalyzed ozonation for degrading an endocrine disruptor—alachlor in water was investigated. The Cu/Al2O3 powders were coated on a cordierite honeycomb column, which was taken as the reactor of catalytic ozonation of alachlor. Additional uncatalyzed experiments were carried out and the results were compared to those of the catalytic runs. The experimental results demonstrated that ...

Tungsten trioxide (WO3) nanostructures were synthesized by hydrothermal method using sodium tungstate (Na2WO4 2H2O) alone as starting material, and sodium tungstate in presence of ferrous ammonium sulfate [(NH4)2 Fe(SO4)2 6H2O] or cobalt chloride (CoCl2 6H2O) as structure-directing agents. Orthorhombic WO3 having a rectangular slab-like morphology was obtained when Na2WO4 2H2O was used alone. W...

Similar reactions of 2,6-dipicolinoylbis(N,N-diethylthiourea) (H2L(a)) with: (i) Ni(NO3)2·6H2O, (ii) a mixture of Ni(NO3)2·6H2O and AgNO3, (iii) a mixture of Ni(OAc)2·4H2O and PrCl3·7H2O and (iv) a mixture of Ni(OAc)2·4H2O and BaCl2·2H2O give the binuclear complex [Ni2(L(a))2(MeOH)(H2O)], the polymeric compound [NiAg2(L(a))2]∞, and the heterobimetallic complexes [Ni2Pr(L(a))2(OAc)3] and [Ni2Ba(...

Two hydrated 5-azotetrazolyl salicylic acid (H3ASA) of [(H3ASA)·H2O] (1) and [(H3ASA)·4H2O] (2) and five H3ASA based dinuclear Ln(3+) complexes of {[Ln2(H1.5ASA)4(H2O)8]·6H2O} [Ln = Dy (3), Tb(4)], {[Gd2(H1.5ASA)4 (H2O)8]·5H2O} (5), {[Sm2(H1.5ASA)4(H2O)8]·6H2O} (6) and {[Eu4(H1.5ASA)8(H2O)18]·10H2O} (7) have been synthesized and characterized by single crystal X-ray diffraction analysis. In 1 a...

Organolead trihalide perovskite solar cells based upon the co-deposition of a combined Al2O3-perovskite layer at T < 110 °C are presented. We report an average PCE = 7.2% on a non-sintered Al2O3 scaffold in devices that have been manufactured from a perovskite precursor containing 5 wt% Al2O3 nanoparticles.

Impact of the device size and thickness of Al2O3 film on the Cu pillars and resistive switching memory characteristics of the Al/Cu/Al2O3/TiN structures have been investigated for the first time. The memory device size and thickness of Al2O3 of 18 nm are observed by transmission electron microscope image. The 20-nm-thick Al2O3 films have been used for the Cu pillar formation (i.e., stronger Cu ...