This paper reports an experimental study on nanofluid convective boiling heat transfer in parallel rectangular minichannels of 800 μm hydraulic diameter. Experiments are conducted with pure water and silver nanoparticles suspended in water base fluid. Two small volume fractions of silver nanoparticles suspended in water are tested: 0.000237% and 0.000475%. The experimental results show that the...

This paper presents a new numerical model, called the CAS model, for boiling heat transfer. The CAS model is based on the cellular automata (CA) technique that is integrated into the popular SIMPLER algorithm for CFD problems. In the model, the CA technique deals with the microscopic nonlinear dynamic interactions of bubbles while the traditional CFD algorithm is used to determine macroscopic s...

Quenching cooling rate of rotary hollow cylinder by one row of water impinging jets has been experimentally studied. Water jets (d = 8 mm) with sub-cooling 55 to 85 ◦C and Reynolds number 8,006 to 36,738 impinged over rotary hot hollow cylinder (rotation speed 10 to 70 rpm) with initial temperature 250 to 600 ◦C. Impingement impact angle of row of jets varied between 0 to 135 ◦ and jet-to-jet s...

Nucleate boiling is a very effective heat transfer cooling process, used in numerous industrial applications. Despite intensive research over decades, a reliable model of nucleate pool boiling is still not available. This paper presents a numerical and experimental investigation of nucleate boiling from artificial nucleation sites. The numerical investigation described in the first section of t...

Heat transfer with liquid–vapor phase change in microchannels can support very high heat fluxes for use in applications such as the thermal management of high-performance electronics. However, the effects of channel cross-sectional dimensions on the two-phase heat transfer coefficient and pressure drop have not been investigated extensively. In the present work, experiments are conducted to inv...

We report the counterintuitive mechanism of increasing boiling heat transfer by incorporating low-conductivity materials at the interface between the surface and fluid. By embedding an array of non-conductive lines into a high-conductivity substrate, in-plane variations in the local surface temperature are created. During boiling the surface temperature varies spatially across the substrate, al...

The typical result of gas phase chemical investigations on a one-atom-at-a-time level are standard adsorption enthalpies (∆Hads) of chemical species on stationary chromatographic surfaces. The standard adsorption enthalpies are deduced from experimental results using either the model of linear gas chromatography assuming mobile adsorption [1] or Monte-Carlo based models [2]. The obtained enthal...

In this work an analytical equation of state has been employed to calculate the PVT properties ofternary refrigerant mixtures. The theoretical EoS is that of Ihm, Song and Mason, which is based onstatistical-mechanical perturbation theory, and the two constants are enthalpy of vaporization ΔHvapand molar density ρnb, both at the normal boiling temperature. The following three temperaturedepende...

In this study, the use of the three-layer feed forward neural network has been investigated for estimating of infinite dilute diffusion coefficient ( D12 ) of supercritical fluid (SCF), liquid and gas binary systems. Infinite dilute diffusion coefficient was spotted as a function of critical temperature, critical pressure, critical volume, normal boiling point, molecular volume in normal boilin...

Calculation of excess quantities of ethylene glycol + water binary fluid systems at seven absolute temperatures (293.15 to 353.15) K from experimentally determined values of density and shear viscosity were presented in previous work. The examination of related functions beside the quality of correlation from several equations on these experimental values has also been reported. Considering...