Microstructural and mechanical properties of alkali activated binders based on blends of Colombian granulated blast furnace slag (GBFS) and fly ash (FA) were investigated. The synthesis of alkali activated binders was conducted at 85 °C for 24 h with different slag/fly ash ratios (100:0, 80:20, 60:40, 40:60, 20:80, and 0:100). Mineralogical and microstructural characterization was carried out b...

Peat normally has high organic matter content and is generally associated with high compressibility and high magnitude and rates of creep. It may also be associated with poor strength characteristics and a risk of large deformation. The main specifications in the peat nature are the presence of acidic or less commonly alkaline media, combined with a high level of ground water. One of the most c...

The Joint Transportation Research Program serves as a vehicle for INDOT collaboration with higher education institutions and industry in Indiana to facilitate innovation that results in continuous improvement in the planning, design, construction , operation, management and economic efficiency of the Indiana transportation infrastructure. NOTICE The contents of this report reflect the views of ...

Elementary and phase composition as well as micrography of the electric furnace slag were examined. The base of slag is made from phases containing Fe, Mn and Ca. Grains differ in size and shape, they cling together to form bigger or smaller agglomerates, depending on separated fractions. Relative distribution of identified phases in separated fractions is presented and the possibility of phase...

environmental pollutions are in considerable attention in steel industries in iran, where mostly are located around isfahan. therefore, an investigation was done mainly on the industrial pollution and waste related to the isfahan steel complex. a plant was installed to collect the uncontrolled fumes, gases and particulates from blast furnace number ii during tapping. this plant collects about 2...

Abstract—Air-cooled Blast Furnace Slag Aggregate (BFSA) is usually referred to as a material providing for unique properties of concrete. On the other hand, negative influences are also presented in many aspects. The freeze-thaw resistance of concrete is dependent on many factors, including regional specifics and when a concrete mix is specified it is still difficult to tell its exact freeze-th...

Inorganic arsenic removal from water using low-cost adsorbents is presented in this paper. Selective removal of As(III) and As(V) from water was performed with natural materials (zeolite, bentonite, sepiolite, pyrolusite and limonite) and industrial by-products (waste filter sand as a water treatment residual and blast furnace slag from steel production); all inexpensive and locally available. ...

A new method has been presented, which leads to a significant improvement of the adsorption ability of blast furnace slag (BFS). An ultra-high pressure water jet mill cavitation disintegrator and a controlled vacuum freeze dryer were used to disintegrate amorphous BFS. Specific surface areas of both BFS and disintegrated slag (BFS-D) were measured using the S method. BFS-D was obtained with an ...