In this study, the production and characterization of open-cell composite metal foam using replica method, also known as polymer impregnation, was investigated. Composite powders were prepared by alloying in a planetary ball mill for 1 hour AA7075 aluminum powder 10% weight B4C powder. Characterization morphology analysis produced performed XRD SEM/EDS analyses. As result analyses, it observed ...

Boron carbide (B4C) added manganese dioxide (MnO2) used as a cathode material for a Zn–MnO2 battery using aqueous lithium hydroxide (LiOH) as the electrolyte is known to have higher discharge capacity but with a lower average discharge voltage than pure MnO2 (additive free). The performance is reversed when using potassium hydroxide (KOH) as the electrolyte. Herein, the MnO2 was mixed with 0, 5...

This manuscript presents a first study of the contamination observed on some of the x-ray mirrors for the Linac Coherent Light Source (LCLS) free-electron laser, the implications to the mirror lifetime properties and an evaluation of candidate techniques towards successful recovery of these B4Cand SiC-coated mirrors. Initial experimental results and plans for upcoming mirror recovery experiment...

Copper metal matrix composites (CMC) are broadly employed in various applications the fields of space, aviation, automobile and electronics industries. The welding CMC using conventional methods is very difficult expensive due to its crystallographic nature. Friction stir (FSW) a more prominent reliable technique for than methods. Therefore, this work based on with material, which prepared stir...

Nanocomposites based on boron carbide B4C are hard materials with wide field of applications in modern technologies. A system first-order ordinary differential equations that simulates the process chemical synthesis nanopowders B4C–TiB2 compositions containing titanium diboride (TiB2) as an additional phase is suggested and resolved numerically for a typical ratio reaction constants. Reagents p...

Friction stir processing (FSP) was used for the fabrication of Al-B4C surface composite. Al-Mg-Si alloy was considered as the substrate and B4C particles were incorporated into the substrate by thermo-mechanical effect of FSP. The effect of tool dimensions and different rotational speeds on the microstructure and microhardness of the composite layers was evaluated and the optimum process parame...

in this research, mechanical alloying was used to synthesize ultrafine grained aa2024 and aa2024-b4c powders in an attrition mill under argon atmosphere up to 50 h with the rotational speed of 400 rpm. in order to determine the grain size of the matrix, x-ray diffraction test and williamson–hall method was used. after mechanical alloying, hot pressing and hot extrusion were used for densificati...

We report on the fabrication of fractal dendrites using laser-induced melting aluminum alloys. target boron carbide (B4C), which is one most effective radiation-absorbing materials characterized by a low coefficient thermal expansion. Due to high fragility B4C crystals, we were able introduce its nanoparticles into stabilization matrix AA385.0. The high-intensity laser field action led formatio...

In this study, it was aimed to produce Al-matrix composite materials with B4C-SiC and B4C-Y2O3 particle reinforcement using the Powder Metallurgy (PM) method. composites in which were used at different sizes ratios, AA2024 powders selected as matrix material. The homogeneously mixed compacted room temperature under a pressure of 525 MPa. raw specimens sintered by keeping them temperatures for 4...