In this study, a whole-cell 3D multiphase non-isothermal model is developed for hydrogen alkaline anion exchange membrane (AAEM) fuel cell, and the interfacial effect on the two-phase transport in porous electrode is also considered in the model. The results show that the insertion of anode MPL, slight anode pressurization and reduction of membrane thickness generally improve the cell performan...

The spontaneous oscillations of the cell voltage and output power density of a PEMFC (with PtRu/C anode) using CO-containing H(2) streams as anodic fuels have been observed during galvanostatic operating. It is ascribed to the dynamic coupling of the CO adsorption (poisoning) and the electrochemical CO oxidation (reactivating) processes in the anode chamber of the single PEMFC. Accompanying the...

Micro-pattern gas detectors, such as the Gas Electron Multiplier (GEM) and the Micromegas need narrow high density anode readout elements to achieve good spatial resolution. A high-density anode readout would require an unmanageable number of electronics channels for certain potential micro-detector applications such as the Time Projection Chamber. We describe below a new technique to achieve g...

It is recently demonstrated that amorphous Ge anode shows higher reversible Na-ion storage capacity (590 mA h g-1) than crystallized Ge anode (369 mA h g-1). Here, amorphous GeO x anode is prepared by a simple wet-chemistry reduction route at room temperature. The obtained amorphous GeO x shows a porous hierarchical architecture, accompanied with a Brunauer-Emmett-Teller surface area of 159 m2 ...

Anode-supported proton-conducting solid oxide fuel cells (PC-SOFCs) fabricated with two representative oxides, BaCe0.7Zr0.1Y0.1Yb0.1O3-δ (BCZYYb) and BaZr0.8Y0.2O3-δ (BZY), were compared to obtain the insight into electrochemical performances when fueled syngas at 700°C correlation between anode thickness (0.4, 0.8, 1.6 mm) operational stability. We have demonstrated that, in stability tests, B...

In this paper we model and experimentally verify the evolution of liquid water and nitrogen fronts along the length of the anode channel in a Proton Exchange Membrane Fuel Cell operating with a dead-ended anode that is fed by dry hydrogen. The accumulation of inert nitrogen and liquid water in the anode causes a voltage drop, which is recoverable by purging the anode. Experiments were designed ...

Title of Document: IN SITU PROCESSING OF PtSn ELECTROCATALYSTS FOR CO TOLERANCE IN PEM FUEL CELLS Robert Utz, Master of Science, 2011 Directed By: Professor Greg Jackson Department of Mechanical Engineering Improved anode CO tolerance is a promising approach for integrating lowtemperature PEM fuel cells with hydrocarbon fuel processors in cost-effective systems for portable and stationary power...

With the rapid progress and wide application of Li-ion batteries, commercial graphite anode can not satisfy the increasing demand for higher capacities. Like other anode materials with higher capacities, silicon materials as anodes remain serious problems for their large volume variations and poor cyclabilities during cycling. One of key problem is how to stabilize the performances of Si anode ...

A core-shell anode consisting of nickel-gadolinium-doped-ceria (Ni-GDC) nanocubes was directly fabricated by a chemical process in a solution containing a nickel source and GDC nanocubes covered with highly reactive {001} facets. The cermet anode effectively generated a Ni metal framework even at 500 °C with the growth of the Ni spheres. Anode fabrication at such a low temperature without any s...

A detailed analysis, based on kinetic and fluid simulations, of striation phenomenon in the plasma display panel cell has been presented. Numerical studies indicate that the phenomenon of striation occurs primarily due to the accumulation of space charge near the anode electrode. These space charges locally create multiple-layer potential distribution near the anode region. The ion density in t...