The corrosion resistant coatings used conventionally are susceptible to degradation, leading to pitting corrosion. This report summarizes the corrosion resistant nature of thin films of Cu-TiO2 coated on mild steel, in different corrosion environments. Nano meter thick (100nm, 125nm, 150nm) composite coatings were coated on steel substrate by RF magnetron sputtering technique. The required targ...

Drilling operations have an important role in manufacturing industries and the application range is about 33% among machining methods. In drilling processes, hole quality affected by workpiece material, parameters, drill diameter, bit features. this study, surface of wear were investigated experimentally when AISI 1040 steel Al7075 aluminum workpieces with twist drills. Three different types bi...

In this paper, we have addressed the Design and simulation results of an electrostatically controlled micro mirror using COMSOL multiphysics Software. The structural mechanical properties of the actuation mechanism of a square shape micro-mirror with the lift-off of the structure used four springs simulating a prestressed cantilever beam. There are few base materials were introduced like Alumin...

This paper introduces a new assessment technique to monitor the quality of coated steel sheet surfaces, mainly used in the construction industry, e.g. as cladding for commercial buildings, external surface composite panels or even domestic applications, so clearly the visual appearance is critical. Normally, these types of steel sheets are coil coated onto steel strips. After curing the coating...

Stainless steel powder was coated on mild steel substrate using plasma coating. The porous coating thus obtained was modified using laser irradiation. The oxidation behaviour of the plasma coated as well as laser treated material was studied in air at 1073 K. There was considerable decrease in oxidation rate of mild steel after plasma coating as expected. In addition the oxidation resistance im...

In the present work, four polymeric nanocomposite PNC coatings were prepared with different concentrations of yttrium aluminum garnet nanoparticles YAG-NPs in polyvinyl butyral PVB matrix. The corrosion protection of the PNC coatings applied on the carbon steel surface was investigated in 1.0 M HCl solution by electrochemical impedance spectroscopy EIS. The YAG-NPs were synthesized by pulse ele...

The main objective of this paper is to study the performance of the various combinations of electrodes which plays an important role in the microbial fuel cells for the generation of electricity. The present work is an experimented investigation concerned with selection of the electrodes for the best performance of a microbial fuel cell. The various combinations of anode/cathode materials like ...

In order to improve the oxidation resistance of ferritic stainless steel, it is possible to deposit a protective coating on steel substrate. In this research through the usage of pack cementation method a coating of titanium was applied on the surface of AISI 430 stainless steel. Scanning Electron-Microscopy (SEM), Energy- Dispersive X-ray spectrometry (EDAX) and X-ray diffraction (XRD) were us...

Automobiles are required to be even lighter for further achieving environmental protection through fuel economy improvement, as well as safety feature enhancement and drivability improvement. Automotive suspensions are also required to reduce their weight and thus more aluminum is being adopted. Aluminum forgings, in particular, are often applied because of their significant weight reduction ef...