In order to better study the trajectory of robot motion, a motion trajectory planning and simulation based on 6-DOF manipulator arm robot is designed. Three and five polynomial methods are adopted to plan motion trajectories. The advantages and disadvantages of the three and five polynomial trajectory planning are summarized. The trajectory planning in the right angle space can make the robot a...

Most of the conventional approaches to mobile robot navigation avoid any kind of contact with the environment or with humans. However, most distance sensors have a limited field of view, so that collisions cannot be fully avoided in practical mobile robot applications. At the same time, direct physical contact also can be used as a means of intuitive communication between a robot and humans. We...

This paper presents the design of our new 33 degree of freedom full size humanoid robot, SAFFiR (Shipboard Autonomous Fire Fighting Robot). The goal of this research project is to realize a high performance mixed force and position controlled robot with parallel actuation. The robot has two 6 DOF legs and arms, a waist, neck, and 3 DOF hands/fingers. The design is characterized by a central lig...

Omnidirectional mobile robots are capable of arbitrary motion in an arbitrary direction without changing the direction of wheels because they can perform 3-DOF motions on a plane. This paper presents a novel mobile robot design with steerable omnidirectional wheels. This robot can operate in either omnidirectional or differential drive modes, depending on the drive conditions. In the omnidirect...

The ability to perform different tasks by a serial manipulator mounted on legged robots, increases the capabilities of the robot. The position/force control problem of such a robot in the stance phase with point contacts on the ground is investigated here. A target plane with known stiffness is specified in the workspace. Active joints of the legs and serial manipulator are used to exert the de...

in this paper, according to high load capacity and rather large workspace characteristics of cable driven robots (cdrs), maximum dynamic load carrying capacity (dlcc) between two given end points in the workspace along with optimal trajectory is obtained. in order to find dlcc of cdrs, joint actuator torque and workspace of the robot constraints concerning to non-negative tension in cables are ...

Modeling, control and implementation of a real redundant robot with five Degrees Freedom (DOF) of the SCARA (Selective Compliant Assembly Robot Arm) manipulator type is presented. Through geometric methods and structural and functional considerations, the inverse kinematics for redundant robot can be obtained. By means of a modification of the classical sliding mode control law through a hyperb...

The authors have focused on the bipedal humanoid robot expected to play an active role in human living space, through studies on an anthropomorphic biped walking robot. As the first stage of developing a bipedal humanoid robot, the authors developed the human-size 35 active DOF bipedal humanoid robot “WABIAN” and the human-size 41 active DOF bipedal humanoid robot “ WABIAN-R”. The authors also ...

This paper proposed the implementation of haptic-based robot which is following human by using fundamental sensors on robot arms without additional sensors. A Robot arm has 6 DOF(6 angle detection devices) to operate like human arm. Robot follows human by interacting with robot arm(s) and human hand(s), as human follows human by hand(s) Key-Words: Intelligent robot, Human robot interaction, Fol...

A major goal for the realization of a new generation of intelligent robots is the capability of instructing work tasks by interactive demonstration. To make such a process efficient and convenient for the human user requires that both the robot and the user can establish and maintain a common focus of attention. We describe a hybrid architecture that combines neural networks and finite state ma...