نتایج جستجو برای: کامپوزیت al sic
تعداد نتایج: 459565 فیلتر نتایج به سال:
کاربرد کامپوزیتهای زمینه فلزی تقویتشده با فاز سرامیک در صنایع مختلف بهسرعت در حال گسترش است. اخیراً تراکم دینامیکی بهعنوان یکی از روشهای مکمل متالورژی پودر در تولید مواد کامپوزیتی موردتوجه قرارگرفته است. علاوه بر این آلومینیوم بهعنوان یکی از مهمترین فلزات صنعتی، بهطور گسترده در تولید کامپوزیتهای زمینه فلزی استفاده میشود. در این تحقیق، اثرات تراکم دینامیکی بر پودرهای خالص و کامپوزیتی آل...
Computational simulations on the thermal analysis of metal matrix composite (MMC) composed of Al and SiC were performed in extended areas of SiC volume fraction. Due to the experimental limitations, only the narrow range of SiC volume fraction has been examined. Through the simulation, which enables current experimental situation to extend, we attempted to explore the dependencies of thermal an...
Metal matrix composites (MMCs) have become attractive for engineering structural applications due to their excellent specific strength property and are increasingly seen as alternative to the conventional materials particularly in the automotive, aerospace and defence industries. Al/SiC MMC has aluminium matrix and the silicon carbide particles as reinforcements and exhibits many desirable mech...
در این پژوهش رفتار کششی دما بالای نانوکامپوزیت Al-3 vol% SiC مورد بررسی قرار گرفته است. جهت ساخت نمونهها، نانوذرات تقویت کننده کاربید سیلیکون (SiC) به همراه ذرات آلومینیوم (Al) خالص(6/99%) به عنوان زمینه توسط آسیاب سایشی مخلوط شدند. مخلوط حاصل سپس تحت فرآیند پرس سرد و اکستروژن گرم در دمای 500 درجه سانتیگراد قرار گرفت. پس از فرآیند اکستروژن و نمونه سازی، رفتار کششی در دماهای مختلف به همراه اندا...
در این پژوهش با آمیندار کردن نانو ذرات سیلیکون کاربید (SiC)، ویژگیهای مکانیکی کامپوزیت پلیمری بر پایه رزین اپوکسی اصلاح بررسی شده است. نخست سه مؤلفهی زاویه چیدمان الیاف کربن، درصد وزنی SiC و مقدار عامل پخت در نظر گرفته شد و با انجام محاسبات و شبیهسازی نرمافزاری و رسم نمودار اورلید، مقادیر هریک از مؤلفهها محاسبه شد. سپس سطح نانو ذرات SiC با غوطهوری در هیدروفلوئوریک اسید تبدیل به Si-OH شد...
In the present study the effect of phase volume fraction on the reinforcement of microstructure and tensile properties of composite extrusion process Al6061/SiC has been studied. For this purpose, the base alloy Al6061 using pure aluminum ingots, silicon, of Al-50% Mg, Al-10% Cr and a thin copper rod was prepared. Next, the composite Al6061/5% SiC, Al6061/10% SiC, Al6061/15% SiC and Al6061/20% ...
چکیده ندارد.
Aluminium-based hybrid composites are a new class of advanced materials with the potential of satisfying the demands in engineering applications. This paper describes the effects of carbon addition on the formation and properties of AMC with SiC nanoparticles reinforcement. The composites were produced via mechanical alloying followed by hot pressing. Three forms of carbon, graphite (GR), multi...
Excellent physical and chemical properties make silicon carbide (SiC) a prominent candidate for a variety of applications, including high-temperature, high-power, and high-frequency and optoelectronic devices, structural component in fusion reactors, cladding material for gas-cooled fission reactors, and an inert matrix for the transmutation of Pu(Katoh, Y. et al., 2007; Snead, L. L. et al., 20...
Magnesium based metal matrix composites (MMCs) have been extensively studied as an attractive choice for automotive and aerospace applications due to their low density and superior specific properties including strength, stiffness and creep resistance. Xi et al [1] studied the Ti6Al-4V particulate (TAp) reinforced magnesium matrix composite which is fabricated by powder metallurgy route. The te...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید