The goal of this contribution is the development and configuration of a simulation scenario for 2-D (radioscopic) and 3-D (computed tomography) X-ray inspection setups for CFRP aerostructures. Characteristics taken into account are object shape, defect types, their form and spectral properties. The simulations are carried out using analytical simulation software. The simulation procedure and pr...

This paper presents the development of a CFRP system for strengthening and repair of steel bridges and structures. The research program included development of the strengthening system, investigation of the behavior of strengthened bridges and special structures, and detailing requirements. Based on the research comprehensive guidelines including structural detailing are provided. This paper de...

Short pulsed laser is preferred to avoid the thermal damage in processing the heat sensitive material, such as carbon fiber reinforced plastic (CFRP). In this paper, a numerical model capturing both the material ablation and polymer matrix pyrolysis processes in pulsed laser processing is established. The effect of laser pulse length from ns order to μs order is studied. It was found that with ...

Carbon fiber reinforced polymers strengthen steel structural elements. These structural elements are normally subjected to static, dynamic and fatigue loadings during their life-time. CFRP laminate is commonly used structures under the subjected loads. A number of focused on the characteristics of CFRP sheets members under static, dynamic and fatigue loadings. is a gap in understanding the bond...

Pull-out experiments were performed on four carbon fiber-reinforced polymer (CFRP) ground anchors simulating their applications in rock and soil. The CFRP tendons used in these anchors comprise a single-strap end on both the ground and air sides. On the ground side, the single-strap end is embedded in a cylinder of high-strength grout which fits into the borehole. In rock applications, the grou...

This paper describes new concepts the author has proposed and demonstrated to realize metal and polymer based sensitive and/or active structural material systems suitable for smart structures. Most of the developments have been done by simple and innovative methods without using sophisticated and expensive sensors and actuators. The following topics are mainly examined: (1) forming optical inte...

An investigation has been made of the potential of pulsed transient thermography for identifying the location of fixtures beneath aircraft skins to facilitate accurate automated assembly operations. Experimental studies have been made of 1.6mm thick aluminium skins and both 2mm and 4mm thick carbon fibre reinforced plastic (CFRP) composite skins over both aluminium and composite struts, represe...

This study presents a design criterion developed for fatigue strengthening of a 120-year-old metallic railway bridge in Switzerland and presents a pre-stressed un-bonded reinforcement (PUR) system developed to apply the strengthening. The PUR system uses carbon fiber reinforced polymer (CFRP) plates; however, unlike conventional pre-stressed CFRP reinforcement methods, preparation of the existi...

the aim of this research is to investigate the effect of carbon fiber reinforced polymer (cfrp) composite fabric on monotonic and fatigue behaviors of reinforced concrete beams. to control the failure occurrence, a small notch was induced at the middle span in bottom surface for all of the studied rc specimens. totally 12 beams were tested from which 6 beams tested under monotonic and 6 other t...

A quick method involving the control of heat and water vapor pressure for preparing moisture-saturated carbon fiber-reinforced plastics (CFRP, 8 unidirectional prepreg layers, 1.5 mm thickness, epoxy resin) has been developed. The moisture-saturated CFRP sample was obtained at 120 ̋C and 0.2 MPa water vapor in 72 h by this method using a sterilizer (autoclave). The bending strength and viscoela...