An understanding of load sharing among constituent phases aids in designing mechanical properties of multiphase materials. Here we investigate load partitioning between the body-centered-cubic iron matrix and NiAl-type precipitates in a ferritic alloy during uniaxial tensile tests at 364 and 506 °C on multiple length scales by in situ neutron diffraction and crystal plasticity finite element mo...

The introduction of computational modelling during alloy development has significantly reduced the cost production and prolonged time spent by researchers doing trials errors in laboratory. In this study, software (JMat Pro) was used to simulate effect addition Zr Co, on material properties NiAl-Mo(Cr) such as elastic modulus, hardness, thermal conductivity, bulk modulus specific heat capacity....

Films of (10 10) textured CoCrPt have been sputtered on polymer substrates for use as thin film tape media. Underlayers of NiAl combined with various intermediate layers were employed to obtain this orientation without thermal damage to the polymer. It was found that NiAl underlayers sputtered on tape substrates have a (112) growth texture, like they do on glass. Film coercivity varied as a fun...

Point defects play an important role in determining the structural stability and mechanical behavior of intermetallic compounds. To help quantitatively understand the point defect properties in these compounds, we developed PyDII, a Python program that performs thermodynamic calculations of equilibrium intrinsic point defect concentrations and extrinsic solute site preferences in intermetallics...

It was observed that the coercivity of CoCrPt films deposited on a polyimide tape was much lower than the coercivity deposited on a rigid glass substrate under identical conditions. X-ray diffraction showed that the desirable ~112! and ~110! texture of the NiAl/CrMn underlayers on the tape substrate was severely degraded during the deposition process. This resulted in the destruction of ~10.0! ...

Selective oxidation of the surface of an ordered alloy requires redistribution of the atomic species in the vicinity of the surface. This process can be understood in terms of the formation and movements of point defects in the compound. On the basis of ab initio density-functional calculation we found both the creation of exchange defects near the NiAl surface and segregation of Ni vacancies t...

The lineshape and intensity of SFG signals of CO adsorbed on supported Pd nanoparticles and Pd(111) are analyzed. For CO/Pd(111) nearly symmetric lorentzian lineshapes were observed. Applying two different visible wavelengths for excitation, asymmetric lineshapes observed for the CO/Pd/Al2O3/NiAl(110) system are explained by a lower resonant and a higher non-resonant SFG signal and a change in ...

The effects of Be additions on the oxidation behavior of ~-NiAl in moist air at 1000°C and borderline alumina-forming y (TiAI) + Laves Ti-Al-Cr based alloys at 800°C and 1000°C in dry and moist air were investigated. The addition of Be to ~-NiAl suppressed the formation of transient alumina, and resulted in the formation of a protective BeAl20 4 spinel phase. In dry air, the addition of Be to t...

Despite the well-known beneficial effect of reactive element dopants on improving oxidation resistance alumina-forming alloys, many open questions remain, including migration and segregation elements at oxide/alloy interface, a key zone in controlling global kinetics interface adhesion. Herein, we elucidate atomic processes governing interfacial dynamics hafnium with γ-Al2O3 θ-Al2O3, two domina...