In this work, a flow injection analysis (FIA) method for the trace determination of lead, cadmium, nickel and cobalt in natural waters by formation of neutral chelates with ammonium pyrrolidine dithiocarbamate (APDC) was developed. The neutral chelates formed was retained in a mini-column packed with Linde type A zeolite (LTA) and type Y Faujasite zeolite (FAU) and then eluted with methyl isobu...

Methanol is an important feedstock in numerous catalytic processes. It can be produced via Fischer-Tropsch reaction from synthesis gas [1] and its further transformation to hydrocarbons up to C10 is the basis of several industrially important reactions as for instance the Methanol to Gasoline process [2]. Methanol can also be used as an alkylating agent for aromatic compounds in zeolite-catalys...

A computational study of the electronic structure and stability of complexes formed between Zeolite Y and boric acid was carried out at the HF and B3LYP levels using 6-31G* basis set. Five structures located as local minimum in PES of complex (structures d, e, f, g, and h). The most stable structure is formed due to hydrogen bonding between two hydroxyl of boric acid and both oxygen of ...

The investigation on the modification of NaY zeolite on LaHY and AEHY (AE refers Ca and Sr and the molar ratio of Ca and Sr is 1:1) zeolites was proformed by XRD, N2-physisorption (BET), XRF, XPS, NH3-TPD, Py-IR, hydrothermal stability, and catalytic cracking test. These results indicate that HY zeolite with ultra low content Na can be obtained from NaY zeolite through four exchange four calcin...

The permeability of reverse osmosis membranes is limited by the diffusive transport of water across a non-porous polyamide active layer. Alternatively, fabricating a microporous active layer capable of rejecting salt ions while allowing for water transport would increase the permeability while maintaining high salt rejection. Zeolites provide a model porous network which is capable of performin...

Bio-based furanics can be aromatized efficiently by sequential Diels-Alder (DA) addition and hydrogenation steps followed by tandem catalytic aromatization. With a combination of zeolite H-Y and Pd/C, the hydrogenated DA adduct of 2-methylfuran and maleic anhydride can thus be aromatized in the liquid phase and, to a certain extent, decarboxylated to give high yields of the aromatic products 3-...

Nanomaterial of Cu(3)(BTC)(2) (BTC = benzene tricarboxylic acid) incorporating Keggin heteropolyacid conveniently prepared at room temperature and recovered by freeze drying outperforms ultrastable Y zeolite in acid catalysed esterification reaction.

A type of zeolite from the analcime family was prepared by using triethanolamine, silica gel and sodium aluminate. The average particle size was around 24 µm. FTIR, XRD and SEM results approved the type of zeolite which was formed

The zeolite type prepared from kaolin depends on the mode of fusion clay with Y and X generated, respectively, partial or full fusion. Wet mixing NaOH followed by dry optimises formation X.

Zeolite Y nanosheets with a micro-meso-macroporous structure were synthesized, and applied in the assembly of a Pd catalyst (Pd/NS-Y) for direct vinylation of thiophenes with high activity and selectivity, as compared to Pd(OAc)2, Pd(NO3)2, and Pd(PPh3)4 catalysts. This feature should be assigned to the highly dispersed Pd(δ+) (δ < 2) species in Pd/NS-Y, which are more active than Pd(2+).