Lead free potassium sodium niobate (KNN) piezoceramics were synthesized via conventional solid state sintering route. Nano and micron WO3 were separately added to KNN through ball-milling. Dielectric and piezoelectric properties of samples sintered in the temperature range of 1110°-1145°C were measured by precision LCR-meter and APC d33-meter devices. The results revealed that micron WO3 partic...

There is keen interest in the use of amorphous WO3 thin films as cathodic electrodes in transmittance-modulating electrochromic devices. However, these films suffer from ion-trapping-induced degradation of optical modulation and reversibility on extended Li(+)-ion exchange. Here, we demonstrate that ion-trapping-induced degradation, which is commonly believed to be irreversible, can be successf...

Tungsten trioxide has been prepared by using P-PTA as a precursor on alumina substrates by spin coating method. Palladium introduced on WO3 film via electrolysis deposition by using palladium chloride as catalytic precursor. The catalytic precursor was introduced on the series of films with different morphologies. X-ray diffractometry (XRD), Scanning electron microscopy (SEM) and XPS were appli...

Citation: Charisiou ND, Siakavelas G, Papageridis KN, Baklavaridis A, Tzounis L, Goula G, Yentekakis IV, Polychronopoulou K and Goula MA (2017) The Effect of WO3 Modification of ZrO2 Support on the Ni-Catalyzed Dry Reforming of Biogas Reaction for Syngas Production. Front. Environ. Sci. 5:66. doi: 10.3389/fenvs.2017.00066 The Effect of WO3 Modification of ZrO2 Support on the Ni-Catalyzed Dry Re...

A portable binary breath analyzer prototype for detection of specific metabolites in breath like nitric oxide, ammonia and isoprene is designed. A binary response implemented with LED display is employed for the prototype. Highly selective NO sensors were fabricated by using modified pervskite based WO3. Experiments demonstrated that the designed prototype embedded with WO3 sensor is able to de...

Tungsten trioxide nanorods have been generated by the thermal decomposition (450 C) of tetrabutylammonium decatungstate. The synthesized tungsten trioxide (WO3) nanorods have been characterized by XRD, Raman, SEM, TEM, HRTEM and cyclic voltammetry. High resolution transmission electron microscopy and X-ray diffraction analysis showed that the synthesized WO3 nanorods are crystalline in nature w...

Ultrathin nanosheets are considered as one kind of the most promising candidates for the fabrication of flexible electrochromic devices (ECDs) due to their permeable channels, high specific surface areas, and good contact with the substrate. Herein, we first report the synthesis of large-area nanosheets of tungsten oxide dihydrate (WO3·2H2O) with a thickness of only about 1.4 nm, showing much h...

Thin films of tungsten trioxide were deposited on quartz substrates by RF magnetron sputtering. Different annealing temperatures in the range from 423 to 973 K were used under ambient atmosphere. The influence of the annealing temperature on the structure and optical properties of the resulting WO3 thin films were studied. The surface morphology of the films is composed of grains with an averag...

A giant persistent photoconductivity (PPC) phenomenon has been observed in vacuum condition based on a single WO3 nanowire and presents some interesting results in the experiments. With the decay time lasting for 1 × 10(4) s, no obvious current change can be found in vacuum, and a decreasing current can be only observed in air condition. When the WO3 nanowires were coated with 200 nm SiO2 layer...