The present study aims at designing a promising Microbial Fuel Cell (MFC) to utilize wastewater in order to generate electricity. Two types of salt bridge have been used in MFC (KCl and NaCl). The maximum electricity generation with 1M KCl and NaCl has been 823 and 713 mV, respectively. Varied salt concentrations (0.5M, 1M, 2M, and 3M) of salt bridge in MFC have been analyzed with different fac...

The present study aims at designing a promising Microbial Fuel Cell (MFC) to utilize wastewater in order to generate electricity. Two types of salt bridge have been used in MFC (KCl and NaCl). The maximum electricity generation with 1M KCl and NaCl has been 823 and 713 mV, respectively. Varied salt concentrations (0.5M, 1M, 2M, and 3M) of salt bridge in MFC have been analyzed with different fac...

in the present study, we investigate the potentiometric behavior of cu2+ carbon paste electrodes based on two mercapto compounds 2-ethylmino-5-mercapto-1,3,4-thiadiazole (eamt) and 2-acetylamino-5-mercapto-1,3,4-thiadiazole (aamt) self-assembled on gold nano-paricle (gnp) as ionophore. then, the results obtained from the modified electrodes are compared. the self-assembled ionophores exhibit a ...

We developed a new implantable FES system with 32 output channels. In this system, a RF coil utilizing amorphous magnetic fibers was introduced for increasing transmission efficiency of this telemeter system which transmitted currents for electric power supply to the implanted system and for applying electrical stimulation to the paralyzed muscles. A helically coiled 19 strand rope wound from u...

It is currently not possible to record electromyographic (EMG) signals from many locations concurrently inside the muscle in a single wire electrode system. We developed a thin-film wire electrode system for multichannel intramuscular EMG recordings. The system was fabricated using a micromachining process, with a silicon wafer as production platform for polyimide-based electrodes. In the curre...

in this study, removal of methylene blue by electro-coagulation method using aluminum and iron electrodes was investigated. the influence of the operating parameters such as contact time, current density, anode type, inter-electrodes distance, initial and final ph and energy consumption rate was determined. dye removal was increased with increases in solution ph, current density and contact tim...

This paper describes a detailed protocol for obtaining chronic, multi-site unit recordings in cerebral cortex of awake animals for periods of three months or more. The protocol includes details for making relatively simple and inexpensive implantable multichannel electrodes that consist of arrays of separate microwires. The results reported in this paper suggest that a viable implant will have ...

On the microscale, the dielectrophoretic (DEP) force may be used to control and manipulate sub-microliter volumes of liquid water using co-planar electrodes of very simple design. The basic phenomenology of liquid DEP on the microscale is familiar; water tends to collect in regions where the electric field is strongest. However, because capillarity and surface wetting become stronger as dimensi...

Practical applications of microbial electrolysis cells (MECs) require high hydrogen production rates and a compact reactor. These goals can be achieved by reducing electrode spacing but high surface area anodes are needed. The brush anode MEC with electrode spacing of 2 cm had a higher hydrogen production rate and energy efficiency than an MEC with a flat cathode and a 1-cm electrode spacing. T...

Much progress has been made over the past several years in the development of high-speed photodiode detectors. A detection bandwidth of 105 GHz together with a responsivity of 0.1 A# have been reported for a metalsemiconductor-metal (MSM) photodiode.’ The most common approach to increasing the bandwidth in MSM photodiodes (at least up to 100 GHz) is to shorten the carrier transit time by reduci...