An experimental study was conducted to investigate on the effects of the relative rotation directions of two tandwm wind turbines on the power production performance and flow characteristics in the wakes of two wind turbines in tandem. The experimental study was performed in a large-scale Aerodynamics/tmospheric Boundary Layer (AABL) Wind Tunnel located at the Aerospace Engineering Department o...

In this paper, using sliding mesh model, the numerical simulation of small vertical axis wind turbine aerodynamic performance was studied with FLUENT software. Got change rule of four same thickness and different camber‘s NACA series asymmetrical airfoil moment coefficient of the wind turbine and wind power machine with the tip speed ratio. Wind turbine benchmark blade around the flow field was...

Wind turbines reliability is affected by stochastic factors in the turbulent inflow and wind turbine structures. On one hand, the variability in wind dynamics and the inherent stochastic structures result in random loads on wind turbine rotor and tower. On the other hand, the inherent structural uncertainties caused by imperfect control of manufacturing process introduce unpredictable failures ...

The location of a wind turbine is critical to its power output, which is strongly affected by the local wind field. Turbine operators typically seek locations with the best wind at the lowest level above ground since turbine height affects installation costs. In many urban applications, such as small-scale turbines owned by local communities or organizations, turbine placement is challenging be...

Abstract: In modern wind farms, maximum power point tracking (MPPT) is widely implemented. Using the MPPT method, each individual wind turbine is controlled by its pitch angle and tip speed ratio to generate the maximum active power. In a wind farm, the upstream wind turbine may cause power loss to its downstream wind turbines due to the wake effect. According to the wake model, downstream powe...

Clean energy harvesting and usage has gained considerable attention in the last few decades. While the horizontal axis wind turbines have been used extensively, they have certain defects and functional limitations. In the present paper, a novel oscillatory wind turbine is proposed. The conceptual design of the new turbine together with its configuration is explained. Dynamical equations of the ...

The design of an advanced controller for wind turbine load mitigation is presented. The controller is based on Nonlinear Dynamic Inversion control methods combined with Pseudo Control Hedging to account for the actuator limits and a two degree of freedom control system for the collective pitch control of the rotor blades. The controller uses wind speed measurement information to adjust to wind ...

the shape of wake behind a wind turbine is normally assumed to have a hat shape for the models used in wind farm layout optimization purposes; however, it is know from experimental tests and numerical simulations that this is not a real assumption. in reality, the results of actual measurements and detailed numerical simulation show that the velocity in wake region has a s-shape profile. the pr...

To enable wind turbines to produce power under great variety of wind conditions a sophisticated control system is needed. Wind turbine system is highly nonlinear and its dynamic changes rapidly with the change of wind speed. Besides this, wind turbine mechanical structure is very flexible due to its great height and tends to oscillate. All this makes the design of wind turbine control system ve...

This paper focuses on the modeling of wind turbines equipped with direct drive permanent magnet synchronous generators for fundamental frequency power system simulations. Specifically, a procedure accounting for the system active power losses to initialize the simulation starting from the load flow results is proposed. Moreover, some analytical assessments are detailed on typical control scheme...