Distribution of residual stresses arising after welding is quite complex and inhomogeneous. Many factors have influence on the magnitude and the profile of the stress distribution curve. In the present paper an x-ray technique was used to analyze the residual stress distribution in steel sheets jointed by industrial welding with linear or circular weld seams. Interpretation of experimental resu...

TIG welding is an arc-welding process that produces coalescence of metals by heating them with an arc between a non-consumable tungsten electrode and the base metal 1 . Many delicate components in aircraft and nuclear reactors are TIG welded due to its reliability. Basically, TIG weld quality is strongly characterized by the weld pool geometry as shown in Figure 1. This is because the weld pool...

Resistance spot welding is one of the most widely used processes in sheet metal fabrication. Improvements in quality assurance are important to increase welding productivity. Until now, quality estimation was performed using dynamic resistance at the secondary circuit, which is easily measured. However, this method has many problems when applied to in-process real-time systems. In this study, w...

Electron beam butt welding of stainless steel (SS 304) and electrolytically tough pitched (ETP) copper plates was carried out according to central composite design of experiments. Three input parameters, namely accelerating voltage, beam current and weld speed were considered in the butt welding experiments of dissimilar metals. The weld-bead parameters, such as bead width and depth of penetrat...

Three-dimensional residual stress mapping of an aluminum 2024-T3 arcan specimen, butt-welded by the friction stir technique, was performed by neutron diffraction. Results indicate that the residual stress distribution profiles across the weld region are asymmetric with respect to the weld centerline, with the largest gradients in the measured residual stress components occurring on the advancin...

Real-time estimation of weld quality from process data is one of the key objectives in current weld control systems for resistance spot-welding processes. This task can be alleviated if the weld controller is equipped with a voltage sensor in the secondary circuit. Replacing the goal of quantifying the weld quality in terms of button size by the more modest objective of indirect estimation of t...

The distortion of laser welded titanium plates was assessed for different operating conditions of the laser welding device, and with different welding parameters (in terms of weld point and prewelding). In this study, Nd : YAG laser welding device was used to join the titanium plates. The results showed that distortion increased stepwise after each welding point along the welding zone (one-side...

Neural network modelling has been applied to search for novel high strength steel weld metal compositions, potentially offering improved tolerance to variations in the weld thermal cycle. An experimental 7 wt% Ni manual metal arc electrode, formulated on these predictions, was used to produce all-weld metals and welds in high strength steel. Mechanical properties were correlated to weld metal m...

Previous ERP studies have found an N400-P600 pattern in sentences in which the number of arguments does not match the number of arguments that the verb can take. In the present study, we elaborate on this question by investigating whether the case of the mismatching object argument in German (accusative/direct object versus dative/indirect object) affects processing differently. In general, bot...