The friction and wear properties of poly(ethylene) terephthalate (PET) filled with alumina nanoparticles were studied. The test matrix varied article size, loading and crystallinity to study the coupled effects on the tribological properties of PET-based nanocomposites. The nanocomposite amples were tested in dry sliding against a steel counterface. The wear rate ranged from 2× 10−6 to 53× 10−6...

Metal-on-metal (MoM) bearings have become popular due to a major advantage over metal-on-polymer bearings for total hip arthroplasty in that the larger femoral head and hydrodynamic lubrication of the former reduce the rate of wear. However, concerns remain regarding adverse reactions to metal debris including metallosis caused by metal wear generated at the taper-head interface and another mod...

Wear of microfilled composites, a visible light-cured composite, and a conventional composite were characterized by two-body abrasion and single-pass sliding. There were differences in abrasion rates among the materials. Tangential forces, wear track widths, and surface failure modes were different among materials. Wear characteristics are combinations of these properties.

We examined the correlation of wear effects with dielectric properties of carbon nanofibers (CNFs; untreated and organosilane-treated)-reinforced high-density polyethylene (HDPE) composites. Wear testing for the nanocomposites over up to 120 h was carried out, and then, dielectric permittivity and dielectric loss factor of the polymer composites with the increased wear time were studied. Scanni...

The friction and wear properties of polyamide 66 (PA66), polyphenylene sulfide (PPS) and polytetrafluoroethylene (PTFE) sliding against hemselves under dry sliding and oil-lubricated conditions were studied by using a pin-on-disc tribometer. The effect of applied load and sliding peed on tribological behaviors of the polymer–polymer sliding combinations under dry sliding and oil-lubricated cond...

Chromium carbide – nickel chromium powder Cr3C2-25wt.NiCr was plasma sprayed by a water-stabilized system WSP®. A series of experiments with variable feeding distance was carried out. Basic characterization of coatings was done by XRD, SEM and light microscopy plus image analysis. Microhardness was measured on polished cross sections. The main focus of investigation was on resistances against w...

In this article, the mechanical and three body abrasive wear behavior of Bidirectional and short Kevlar fiber reinforced epoxy composites at five different fiber loading (10wt%, 20wt%, 30wt%, 40wt% and 50wt%) have been evaluated. The mechanical properties i.e. tensile strength, flexural strength, inter-laminar-shear strength, and impact strength are performed to notice the behavior of mechanica...

Aluminium metal matrix composites are widely used in engineering applications, specially automobile, aerospace, marine and mineral processing industries owing to their improved wear properties compared to conventional monolithic aluminium alloys. Presently hybrid composites plays vital role in engineering application. The researchers who developed composites, were subjected to many characterisa...

In this study carburizing and boronizing processes were applied to powder metallurgy steel specimens and the mechanical and tribological properties of the substrate and coatings were evaluated under various process conditions. The specimens, made from industrial test pieces, were carburized in a powder pack for a duration of 2-5 hrs at 850-950 ˚C. Similar specimens were pack boronized for 4 hr...