Five copper (Cu) sources were studied at pH 2.5, 5.5, and 6.5 to determine how Cu affects phytate phosphorus (PP) hydrolysis by phytase at concentrations up to 500 mg/kg diet (60 min, 40-41 degrees C). Subsequently, Cu solubility with and without sodium phytate was measured. Adding Cu inhibited PP hydrolysis at pH 5.5 and pH 6.5 (P < 0.05). This inhibition was greater with higher concentrations...

Electromigration in the Ni/Sn-Zn/Cu solder interconnect was studied with an average current density of 3.51 9 10 A/cm for 168.5 h at 150 C. When the electrons flowed from the Ni side to the Cu side, uniform layers of Ni5Zn21 and Cu5Zn8 were formed at the Ni/Sn-Zn and Cu/Sn-Zn interfaces. However, upon reversing the current direction, where electron flow was from the Cu side to the Ni side, a th...

The influence of alloying element S, Se or Te on the oxidation resistance of pure Cu was studied by oxidizing in 0.1 MPa pure oxygen atmosphere at 573-873 K in comparison with a 6N Cu (99.9999 wt.%). The addition of S, Se or Te is found to improve the oxidation resistance of Cu remarkably. This improvement is contributed from the accumulation of alloying element at the Cu2O/Cu interface and seg...

Annealing of dilute binary Cu(Ti), Cu(In), Cu(Al), Cu(Sn), Cu(Mg), Cu(Nb), Cu(B), Cu(Co) and Cu(Ag) alloy films resulted in the strongest <111> fiber texture for Cu(Ti) and the lowest resistivity for Cu(Ag). The behavior of the alloy films was compared and contrasted with that for a pure evaporated Cu film. Electron beam evaporated films with compositions in the range of 2.0-4.2 at% and thickne...

we studied cu concentration on part of aras riparian vegetation. cu was selected as an index metal due to polluting the aras river through agarak copper mines drainage. results of cu concentration in indicator plant have been examined using spss16. considering the situation of the copper mines as well as the habitat of the indicator plant, two stations before and after the exit of the industria...

The poly(ethyleneimine)-functionalized silica has been developed successfully as an effective adsorbent for the adsorption removal of Cu(II) ions from electroplating wastewater. The influences of pH, contact time and initial concentration of Cu(II) ions on the adsorption capacity and the effect of adsorbent dosage on the removal efficiency of Cu(II) ions from electroplatin...

The accumulative partitioning of Pb and Cu in the Rhizophora apiculata was studied randomly in the Setiu mangrove forest, Terengganu. Samples of leaves, barks and roots were collected randomly from the selected studied species. Sediments between the roots of the sampled mangrove plants were also collected. The results from analysis for Rhizophora apiculata shows that the concentration of Pb and...

Since Cu was found to be attractive as interconnect materials for ultra-large scale integrated (ULSI) Si devices, the electrical properties of Cu films have been extensively studied to prepare low resistance films. It was found in our previous papers that reduction of the electrical resistance of the Cu films was achieved by increasing grain sizes of the Cu films and large-grained Cu films were...

Using a paraffin impregnated graphite electrode (PIGE) and mercury-modifiedpyrolytic graphite electrode with basal orientation (Hg-PGEb) copper(II) and Cu(II)-DNApurine base solutions have been studied by cyclic (CV) and linear sweep voltammetry(LSV) in connection with elimination voltammetry with linear scan (EVLS). In chlorideand bromide solutions (pH 6), the redox process of Cu(II) proceeded...