Pulse-width modulated (PWM) adjustable frequency drives (AFDs) are extensively used in industries for control of induction motors. It has led to significant advantages in terms of the performance, size, and efficiency but the output voltage waveform no longer remains sinusoidal. Hence, overshoots, high rate of rise, harmonics and transients are observed in the voltage wave. They increase voltag...

I hereby declare that I am the sole author of this thesis. This is a true copy of the thesis, including any required final revisions, as accepted by my examiners. I understand that my thesis may be made electronically available to the public. Abstract This thesis presents a study of the bias-induced threshold voltage metastability phenomenon of the hydrogenated amorphous silicon (a-Si:H) thin f...

In this paper we present a new model for calculating the capacitance of MEMS sensor with corrugated diaphragm. In this work the effect of residual stress is considered on deflection of diaphragm and capacitance of sensor. First, a new analytical analyzes have been carried out to derive mathematic expressions for central deflection of corrugated diaphragm and its relationship with residual stres...

This paper proposes a high voltage ratio and low ripple interleaved boost DC-DC converter, which can be used to reduce the output voltage ripple. This converter transfers the low DC voltage of fuel cell to high DC voltage in DC link. The structure of the converter is parallel with two voltage-doublers boost converters by interleaving their output voltages to reduce the voltage ripple ratio. Bes...

and a 15011s time constant. These pulses are applied on the collector of the simulated devices, while their emitter and substrate are grounded. The thermal boundary condition is considered to be a constant temperature of 300K at the bottom of the simulation domain which corresponds to the substrate electrode. Fig. 2 shows the calculated transient voltage responses of the two transistors submitt...

In this paper, the dynamic response of resonating nano-beams is investigated using a strain gradient elasticity theory. A nonlinear model is obtained based on the Galerkin decomposition method to find the dynamic response of the investigated beam around its statically deflected position. The mid-plane stretching, axial residual stress and nonlinear interaction due to the electrostatic force on ...

the static pull-in instability of beam-type micro-electromechanical systems is theoretically investigated. two engineering cases including cantilever and double cantilever micro-beam are considered. considering the mid-plane stretching as the source of the nonlinearity in the beam behavior, a nonlinear size-dependent euler-bernoulli beam model is used based on a modified couple stress theory, c...

Under the proper orientations and excitations, the transverse output of rotationally symmetric four-contact van der Pauw (VDP) stress sensors depends upon only the in-plane shear stress or the difference of the in-plane normal stresses on (100) silicon. In bridgemode, each sensor requires only one four-wire measurement and produces an output voltage with a sensitivity that is 3.16 times that of...

The boost topology is often the designer's first choice when dealing with PFC front-ends. This topology is well documented in the literature and has obvious advantages like continuous input current and low voltageand current-stress compared to other PFC topologies. The PFC SEPIC converter also has the advantage of the continuous input current but suffers from high voltageand current stress. In ...