The vibration behavior of an atomic force microscope [AFM] cantilever with a crack during the nanomachining process is studied. The cantilever is divided into two segments by the crack, and a rotational spring is used to simulate the crack. The two individual governing equations of transverse vibration for the cracked cantilever can be expressed. However, the corresponding boundary conditions a...

In the present work, the free vibration behavior of rectangular graphene sheet under shear in-plane load is studied. Nonlocal elasticity theory has been implemented to study the vibration analysis of orthotropic single-layered graphene sheets (SLGSs) subjected to shear in-plane load. The SLGSs is embedded on a viscoelastic medium which is simulated as a Visco-Pasternak foundation. Using the pri...

in this paper, a simple and efficient method for modeling and solving the equations of a rotor with any number of disks, bearings and mass unbalances is presented using the assumed modes method. this model consists of a continuous shaft, arbitrary number of mass unbalances in any axial location and phase angle, and any number of rigid disks and bearings. this arrangement is extensively used in ...

because of fluctuation in leg tension, pitch motion is very effective fatigue and life safety of leg elements in tension leg structures (tlss). in this paper an exact solution for pitch vibration of a tls interacting with ocean wave is presented. the legs of tlp are considered as elastic springs. the flow is assumed to be irrotational and single-valued velocity potentials are defined. the effec...

Serotonin (5-HT) and norepinephrine-dependent plateau potentials are found in spinal motoneurons in reduced turtle and cat preparations. Triggering the plateau potential by short-lasting synaptic excitation causes a prolonged self-sustained firing, which can be terminated by short-lasting synaptic inhibition. The presence of plateau potentials can also allow neurons to fire in a bistable manner...

Structural mechanical vibration is commonly measured through punctual sensors, i.e. sensors that measure the structural behavior at only one point. Examples of such sensors are accelerometers, LVDTs, non-scanning laser vibrometers, and proximity probes. This project aims at developing an acquisition system able to measure the dynamic behavior of a structure as a whole (many points) using only o...

A neuro-fuzzy modeling for forecasting the future dynamical behavior in vibration testing during satellite qualification is proposed in this paper. Vibration testing is employed for emulating vibrations present during the lifetime launching. There are different levels of excitation during vibration testing in order to verify and assure that the satellite and their sub-systems will support the e...

Recently, a large amount of studies have been related to nonlinear systems with multi-degrees of freedom as well as continuous systems. The purpose of this paper is to optimize passive vibration absorbers in linear and nonlinear states for an Euler-Bernoulli beam with a nonlinear vibratory behavior under concentrated moving load. The goal parameter in the optimization is maximum deflection of t...

This paper presents a reduce roll vibration of the full vehicle model with passive suspension systems using vibration absorber to change the dynamic system matrix stat’s eigenvalue. Since using the controller system has been splurged and required to energy consuming, in this research the vehicle body roll vibration has been reduced and supplied vehicle stability using a vibration absorber for t...

In this paper, we focus on a class of robotic manipulators that utilize continuous backbone structures. Such manipulators, known as “continuum” robots, exhibit behavior similar to tentacles, trunks, and snakes. Specifically, we have previously discussed some of the mechanical and kinematic details of the Clemson “Tentacle Manipulator.” This work examines the dynamic characteristics of this mani...