This study reports the welded joint of a novel 590 MPa V-N microalloyed wheel steel on microstructure and mechanical properties after flash butt welding. The welding parameters were current 48°/582.0 A, upsetting 44°/516.6 workpiece clearance 1.5 mm. evolution in occurred as follows: seam (ferrite side plate + acicular ferrite +martensite)→coarse-grained zone (acicular granular bainite)→fine-gr...

Production of lightweight metals with a higher strength to weight ratio is always the main goal of researchers. In this article, equal channel multi angular pressing (ECMAP) process as one of the most appealing severe plastic deformation (SPD) methods on production of ultra-fine grained (UFG) materials studied. Two main routes A and C investigated by FEM and compared with each other from differ...

Fracture toughness (K1C) of medium carbon steel (0.5% C) has been determined by round notched tensile specimen. Two notch diameters (5.6mm and 4.2mm) and three notch angles (α) namely 45, 60 and 75 have been used to observe the effect of notch diameters and notch angle on fracture toughness of the steel. By heat treatment the microstructure of the steel is also varied and its effect on the frac...

1 List of symbols and abbreviations 3 Chapter 1: INTRODUCTION 6 Chapter 2: LITERATURE SURVEY 8 2.1: The essence of ultra fine grained materials 8 2.2: Severe plastic deformation: a method for producing UFG microstructure 11 2.3: Physical properties of materials derived from GB character 15 2.4: Non-equilibrium GBs: theoretical aspects 16 2.4.1: Conventional models for GB structure 16 2.4.2: Mod...

One of the challenges in microstructure analysis nowadays resides in the reliable and accurate characterization of ultra-fine grained (UFG) and nanocrystalline materials. The traditional techniques associated with scanning electron microscopy (SEM), such as electron backscatter diffraction (EBSD), do not possess the required spatial resolution due to the large interaction volume between the ele...