Two glass ceramics in the CaO--P2O5--MgO system with the incorporation of K2O or TiO2 oxides were prepared with the goal of using them as potential bone graft substitutes. The incorporation of TiO2 and K2O led to the preparation of specific crystalline phases in the structure of the glass ceramics, which show different degrees of biodegradation. In fact, the 45CaO--45P2O5--5MgO--5K2O has been p...

Introduction: The aim of the present study was to evaluate the effect of glass ceramic insert in the sandwich technique to reduce microleakage in class II composite resin restorations. Methods: Sixty sound human upper second premolars were selected and randomly divided into six groups (n=10). Class II box-only cavities were prepared in distal aspects of each tooth with gingival margin located a...

The effect of iron oxide content on the crystallisation of a diopside glass–ceramic glaze was investigated using a glass–ceramic frit in the K2O–ZnO–MgO–CaO–Al2O3–SiO2 system and a granite waste glass. Measurements by X-ray diffraction (XRD) combined with scanning electron microscopy (SEM) and EDX microanalysis showed that the distribution of Fe ions among different crystalline phases such as f...

The bioactive glass 45S5 was crystallized to 8-100 vol % of crystals by thermal treatments from 550-680 degrees C. The micro-structure of the glass-ceramics had a very uniform crystal size, ranging from 8 to 20 microns. Fourier-transform infrared (FTIR) spectroscopy was used to determine the rate of hydroxycarbonate apatite (HCA) formation that occurs on bioactive glass and glass-ceramic implan...

Lithium ion batteries have proven themselves the main choice of power sources for portable electronics. Besides consumer electronics, lithium ion batteries are also growing in popularity for military, electric vehicle, and aerospace applications. The present review attempts to summarize the knowledge about some selected membranes in lithium ion batteries. Based on the type of electrolyte used, ...

A macroporous phosphate invert glass-ceramic (PIGC) was derived from the mother glass with a composition of 60CaO-30P2O5-3TiO27Na2O in mol%. The mother glass powders were coated on a polymer sponge skeleton and subsequently sintered at 850 C for 1 h through burning off the sponge, resulting in the preparation of macroporous PIGC. The resulting macroporous PIGC consists predominantly of tricalci...

Waste derived glass ceramic composites prepared by low temperature sintering/sinter-crystallisation I. Ponsot, R. Detsch, A. R. Boccaccini & E. Bernardo To cite this article: I. Ponsot, R. Detsch, A. R. Boccaccini & E. Bernardo (2015) Waste derived glass ceramic composites prepared by low temperature sintering/sinter-crystallisation, Advances in Applied Ceramics, 114:sup1, S17-S25, DOI: 10.1179...

The present study aimed to evaluate the influence of various heat-pressing procedures (different holding time and heat pressing temperature) on the microstructure and flexural strength of lithium disilicate glass ceramic. An experimental lithium silicate glass ceramic (ELDC) was prepared from the SiO2-Li2O-K2O-Al2O3-ZrO2-P2O5 system and heat-pressed following different procedures by varying tem...

The development of bioactive glass-ceramic materials has been a topic of great interest aiming at enhancing the mechanical strength of traditional bioactive scaffolds. In the present study, we test and demonstrate the use of Biosilicate® glass-ceramic powder to fabricate bone scaffolds by the foam replica method. Scaffolds possessing the main requirements for use in bone tissue engineering (95%...