In this work, the influence of the substrate bias on the crystalline structure and surface composition of Ti6Al4V thin films prepared by rf magnetron sputtering were studied. Samples were grown onto two different types of substrates: AISI 420 steel and common glass using a Ti6Al4V (99.9 %) target. Substrate bias was varied from –100V to –200 V. Samples were characterized by X-ray diffraction (X...

Electron Beam Melting (EBM) is an Additive Manufacturing technique which can be used to fabricate complex structures from alloys such as Ti6Al4V, for example for orthopaedic applications. Here we describe the use of EBM for the fabrication of a novel Ti6Al4V structure of a regular diamond lattice incorporating graded porosity, achieved via changes in the strut cross section thickness. Scanning ...

Sintered Ti6Al4V powder compacts potentially to be used in implant applications were prepared using commercially available spherical and angular powders (100-200 mum) within the porosity range of 34-54%. Cylindrical green powder compacts were cold compacted at various pressures and then sintered at 1200 degrees C for 2 h. The final percent porosity and mean pore sizes were determined as functio...

The oxidative burst of human blood cells in the presence of different metal materials was investigated using chemiluminescence assay. Commercial pure titanium (Ti), titanium alloy (Ti6Al4V), and stainless steel 316L (SS) in particulate form with <20 μm in size were used. The effect of particulate materials opsonisation on the upregulation of the respiratory burst production by blood cells was a...

Recently, some novel surface engineering techniques have been developed, which may be used for extending lifetime of artificial joints; however, the full potential will not be realised until the tribological behaviour of surface engineered bio-medical materials has been fully characterised. In the present investigation, a pin-on-disc tribometer has been used to evaluate the tribological respons...

In this paper, we present the mechanisms of premature fracture modular neck stems in two case studies: (I) when and stem are both made same Ti6Al4V alloy, (II) from different alloys, CoCrMo alloy. Our study integrates orthopedic patients who have undergone primary uncemented THA for usual indications centers (Community Health Centre University Medical Centre). Both part national public health c...

Diamond-like carbon (DLC) films are favored for wear components because of diamond-like hardness, low friction, low wear, and high corrosion resistance (Schultz et al., Mat-wiss u Werkstofftech 2004;35:924-928; Lappalainen et al., J Biomed Mater Res B Appl Biomater 2003;66B:410-413; Tiainen, Diam Relat Mater 2001;10:153-160). Several studies have demonstrated their inertness, nontoxicity, and t...

STUDY DESIGN In vitro fatigue loading using a corpectomy model outfitted with posterior pedicle screw instrumentation. OBJECTIVE The purpose of this study was to detect differences in fatigue resistance of titanium and stainless steel spinal constructs that use rods contoured using a French Bender, and to compare differences in fatigue resistance of contoured and straight titanium rods. SUM...

this paper was aimed to report the 3d finite element analysis simulation of laser welding process of ti6al4v 1.7 mm sheets in butt joint in order to predict the temperature distribution, hardness, and weld geometry. the butt-joint welds were made using co2 laser with the maximum power of 2.2 kw in the continuous wave mode. a part of the experimental work was carried out to verify the weld geome...